Select Page

aluminium shaft collar

Product Description

FV1224 FV1228
Style speed 260pieces/min Design and style speed 260pieces/min
Maximum feeding size 1200*2400mm Optimum feeding dimension 1200*2800mm
Minimum feeding measurement 350*600mm Least feeding measurement 350*600mm
Feeding by partition 1500*2400mm Feeding by partition 1500*2800mm
Highest printing area 1200*2360mm Highest printing spot 1200*2740mm
Printing precision ±0.5 Printing accuracy ±0.5
Thickness of standard printing plate 7.two Thickness of normal printing plate seven.2
Thickness of printing paperboard 2-eleven Thickness of printing paperboard two-eleven
Adjustment of printing roller 360° Adjustment of printing roller 360°
Axial adjustment of printing roller ±10 Axial adjustment of printing roller ±10
Die cutting dimensions 1150*2350 Die cutting dimension 1150*2750mm


Perform and traits

one. Triaxial foremost edge roller wheel vacuum adsorption paper feeding program, the frequency changer adjusts the vacuum strain, accommodate the different paperboard dimension and the variable paperboard.
2. The entire equipment is designed and created in accordance to dependability perform and security, in accordance with European CE standard.
three. Distant maintenance of computers (buyers with networking situations), rapidly solve gear failures, improve service performance, reduce upkeep costs.
4. All travel rollers are produced of high quality metal with CZPT and difficult chrome plated surface area.
five. Each and every unit is outfitted with an crisis end change, which can end the strolling of each and every unit internally to make sure protection.
6. Centralized remedy of paper dust to maintain the operating surroundings clean.
seven. Get storage for one hundred,000, automated zero, automatic reset.
8. The modular style facilitates the equipment update.
nine. The transmission gear is created of substantial top quality metal and grinded, following heat treatment, HRC hardness is better than sixty levels.
ten. The software of keyless shaft collar, transmission gear and shaft do not loose soon after prolonged-time period making use of, to make certain the accuracy of printing.
eleven. The complete equipment adopts high precision ball screw for a lot more accurate
adjustment and longevity.

RFQ

one. Q: Are you a manufacturer, buying and selling company or a third social gathering?

A: We are a manufacturer, located in industrial spot south of HangZhoug county, ZheJiang province, China. Warmly welcome to visit our firm.

 

two. Q: What is your least get amount, can you send out me samples?

A: Our minimum quantity is 1 set, as our product is equipment tools, it’s hard to send you samples, if you have any queries about the items, you should feel free of charge to contact us for more element, we are glad to give you a lot more information this kind of as specifications, video, and so on.

 

three. Q: How does your factory do regarding quality controlling?

A: 1) All raw material we used are environmental-pleasant

    2) Skillful workers care every details in handling the producing and packing process

    3) Quality control department are specially responsible for quality in each process

We have been kept delivering substantial quality items by introducing sophisticated systems for in excess of twenty several years, and our products are also widely exported to a lot of distinct international locations such as Russia, the Middle East, Africa, Southeast Asia, EU, and so on, which earned us a high reputation between the customers.

 

four. Q: How about the soon after-sale service?

A: 1) TM on-line for 24 hrs, also make contact with by email, , MSN, , and so on.

    2) To resolve the difficulties with videos/pictures.

    3) One year guarantee for spare components alter.

 

US $30,000
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Engineers Available to Service Machinery Overseas
Warranty: 2years
Model No.: Fv1224
Voltage: 380V/440V as Required
Speed: 120-200 Piece/Min
Power: 50Hz

###

Customization:

###

FV1224 FV1228
Design speed 260pieces/min Design speed 260pieces/min
Maximum feeding size 1200*2400mm Maximum feeding size 1200*2800mm
Minimum feeding size 350*600mm Minimum feeding size 350*600mm
Feeding by partition 1500*2400mm Feeding by partition 1500*2800mm
Maximum printing area 1200*2360mm Maximum printing area 1200*2740mm
Printing accuracy ±0.5 Printing accuracy ±0.5
Thickness of standard printing plate 7.2 Thickness of standard printing plate 7.2
Thickness of printing paperboard 2-11 Thickness of printing paperboard 2-11
Adjustment of printing roller 360° Adjustment of printing roller 360°
Axial adjustment of printing roller ±10 Axial adjustment of printing roller ±10
Die cutting size 1150*2350 Die cutting size 1150*2750mm
US $30,000
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Engineers Available to Service Machinery Overseas
Warranty: 2years
Model No.: Fv1224
Voltage: 380V/440V as Required
Speed: 120-200 Piece/Min
Power: 50Hz

###

Customization:

###

FV1224 FV1228
Design speed 260pieces/min Design speed 260pieces/min
Maximum feeding size 1200*2400mm Maximum feeding size 1200*2800mm
Minimum feeding size 350*600mm Minimum feeding size 350*600mm
Feeding by partition 1500*2400mm Feeding by partition 1500*2800mm
Maximum printing area 1200*2360mm Maximum printing area 1200*2740mm
Printing accuracy ±0.5 Printing accuracy ±0.5
Thickness of standard printing plate 7.2 Thickness of standard printing plate 7.2
Thickness of printing paperboard 2-11 Thickness of printing paperboard 2-11
Adjustment of printing roller 360° Adjustment of printing roller 360°
Axial adjustment of printing roller ±10 Axial adjustment of printing roller ±10
Die cutting size 1150*2350 Die cutting size 1150*2750mm

Types of Shaft Collars

A shaft collar is a simple machine component that is an integral part of many power transmission applications. It is most commonly found in motors and gearboxes and serves as a mechanical stop, locating component, and bearing face. Its easy installation and quick assembly make it an ideal component for a variety of applications.
Shaft Collar

Clamp-style shaft collars

Clamp-style shaft collars are fasteners that fit over shafts. They can be made of aluminum, steel, or titanium. Stainless steel collars are available in corrosion-resistant finishes to prevent galling. Engineered plastics are also available. Black oxide finishes improve corrosion resistance and provide a smooth surface for screw installation.
The holding power of Clamp-style shaft collars depends on the shaft’s bore size and concentricity, which are important factors in many applications. The fastening hardware is also important, as it can affect torque transmission. For example, forged screws are superior to broached screws in a number of ways, including reduced risk of reaming out. In addition, the material of the collar must be strong enough to withstand the torque required by the screw.
Shaft collars are complicated components. Their performance can determine the efficiency of an application. The design process is complex, and many factors are considered. Considerations include shaft geometry, bore size, and style. Shaft collar manufacturers will provide performance information on their website. If you are not satisfied with the information provided, you can contact the manufacturer.
Clamp-style shaft collars are made from high-quality materials. The metal used to produce them is lead-free and stainless, which resist corrosion. Moreover, these shaft collars have a high holding power, so they won’t mar your shaft and ensure proper alignment. These collars can be found in a variety of bore sizes, from 1/8″ to six inches.
Clamp-style shaft collars are available in lead-free steel, 303 and 316 stainless steel, and aluminum. They are available in a one-piece clamp or a two-piece clamp style. They are made of high-grade steel and are machined to a burr-free surface.
Clamp-style shaft collars have two-piece clamps that can be easily disassembled and installed in their proper position. Two-piece clamps are stronger than one-piece collars because all of the clamping force goes directly into the clamping shaft. Two-screw clamps have two and four-screws, and can also be wrench-tightened.
Set screw collars were one of the first shaft collars to be mass-produced. They were often used on line shafting in early manufacturing mills. While they can work well for simple shaft positioning, they’re not the most reliable option for complicated applications. Furthermore, set screws can cause damage to the shaft, making it difficult to reposition the collar or adjust its angle. For this reason, small flats are usually added to the shaft at set screw locations.
Shaft Collar

Set-screw shaft collars

Set-screw shaft collars are used to secure a shaft to a screw. They are available in several sizes and materials. Typical types include the solid, quick-release, split, and threaded styles. They come in an assortment of sizes and materials, including aluminum, zinc plated steel, and black oxide steel. Most are available in stock and are available in various sizes.
These collars come in many sizes and are ideal for use with standard round shafts. They are easy to install and disassemble and feature a high clamping power. They are also available in custom designs and materials. Set-screw shaft collars are available for use in various industries.
The company manufactures a variety of collars, including steel, zinc plated steel, and stainless steel. They also offer custom and adjustable collars. These collars are used in a variety of industries, including the food, chemical, pulp and paper, and wood industries. They are available with a variety of screw threads.
The screw and shaft material relationship must be compatible to ensure a secure fit. In addition, the shaft material should be softer than the screw material. For this reason, set-screw shaft collars are most effective when the shaft is made from softer material. Some setscrew shaft collars feature forged socket set screws to increase their holding power and torque capacity. Additionally, forged stainless steel set screws also increase their performance and hardness.
Shaft collars can be used on machines and transmission applications. They can be adjusted with a set screw or grub screw. In addition to setting the collar into place, a screw driver can also be used to adjust the grip on the collar. This type of shaft collar is often used in manufacturing applications.
Clamp-type collars are another type of shaft collars. These types allow the shaft to rotate and are used for mounting sensors and fixtures. These collars can be found in one-piece or two-piece styles. They can also be used in harsh environments.
Shaft Collar

Single split shaft collars

Single split shaft collars are used in many applications to protect the shaft from wear and tear. They are easy to install and disassemble, reducing downtime and labor costs. These collars utilize full seating torque of the set screws to apply equal force distribution around the shaft’s circumference, providing stronger holding power.
These shaft collars are available in a variety of materials. They are typically made from different types of steel, including stainless, alloyed steel, nylon, and aluminum. Some are even available in custom sizes. In addition to standard sizes, single split shaft collars also come in a variety of finishes, including black oxide and chrome.
Single split shaft collars come in metric and imperial sizes. They can be made of various materials, including zinc and lead-free steel. These collars are available with a black oxide finish for extra corrosion resistance. They are also available in 303 and 316 stainless steel. They can also be made from engineered plastics.
Single split shaft collars are the most popular style of shaft collars. They are easy to install and disassemble. They provide a tight fit and superior holding power over solid shaft collars. They are also easier to replace and can be used on a variety of shafts. In addition, single split shaft collars are easy to remove and adjust.
Single split shaft collars are available in a variety of bore sizes. They can fit shaft diameters from 1/8″ to four fifteen/16″. Ideally, the material used should be softer than the set screw. You can also choose between non-plated and chrome-plated collars. These collars are available in metric or imperial measurements.
Single split shaft collars are one-piece or two-piece designs. Single-piece shaft collars feature one screw and two-piece collars have two. They are easier to install than single-piece shaft collars and are suitable for lighter duty applications. Single split shaft collars are available in a variety of threaded bore sizes.
Single split shaft collars have a wide range of uses in industrial settings. They can secure bearings on shafts or locate components in motor assemblies. They can also function as mechanical stops. RS PRO offers a wide selection of shaft collars that meet and exceed industry standards.
 aluminium shaft collar aluminium shaft collar
editor by czh 2023-02-03

English