Product Description

Ideal Marketing Display screen Printing, Emblem Printing Machine for LPG Gasoline Cylinders^

Main Parameters
 

I. Main construction and doing work theory

The printing machine is the special machine for LPG cylinder physique printing word, brand and other sample. blended with frame, urgent plate, press, shift and handle system. With restricted building, dependable working, good print good quality, less difficult operation, and large operating effectiveness.
The operating theory of this equipment is: set the cylinder on the supporting table, press “Start off” button, the feeding technique will transfer the cylinder to appointed print place and fix, the print glue plate will shut routinely, then the print plate will remove immediately, after end, the press glue plate will carry, the print plate back again up, the feeding program take the cylinder out, 1 flow into is ending.

II. Assemble and adjustment

1. Set the products in stage operating floor, linked with air source then change gasoline triple areas, exhaust throttle valve, permit the products doing work as underneath: feeding- press glue plate down push-go the printer-elevate the plate, get back the print plate, just take out the cylinder
2. Adjustment for the press glue plate, set the cylinder to supporting desk to print spot, the gas cylinder pressed, the glue plate complete linked with cylinder area, and preserve properly force.
3. Adjustment for printing place, modify the printing base and maintain 5-8mm length to cylinder area, and in the middle and in stage.
4. Adjustment for ink scrap, enable the ink blade a small related with silk display screen surface area.

III. Maintain and Attention

one. Add lubrication oil for motion parts in time, pneumatic FRL ought to preserve oil to lubricate the cylinder and drainage on time.
2. Keep cleaning of un-print cylinder floor, ought to cleanse cylinder floor prior to print, to protect the dusty motivated the print good quality or injury the silk screen.
3. Properly modify the print ink viscosity in printing, also slender will oil leakage, also thick will ink difficultly, non-uniform coloring.
4. Keep cleansing of print ink, defend the dusty fall to ink or printing, in any other case will injury the silk screen.
five. Remove the print plate after printing, cleanse the rest ink and cleanse the print plate, press glue plate, scrap blade, and many others. Should clean by comfortable factor in cleaning, can’t use tough materials, to prevent to harm the silk monitor. 

Shipping Photograph

Other LPG Gas Cylinder Generating Equipment

LPG gasoline cylinder welding line equipment introduction
We supply the comprehensive welding answers for LPG cylinder, this kind of as socket welding device, deal with/collar welding machine, foundation ring welding machine, longitudinal welding machine one/double circumference welding machine et cetera.

—— Device Configuration

Think about various specifications, we prompt 2 device configuration Total automobile & Semi auto which could be selected by clients to in shape for the funds.

Entire autoamtic welding line characteristic

Entire-vehicle welding machine contains socket welding, deal with/collar welding, base ring welding, circumference welding, and all devices perform immediately, the cylinder halves are conveyed by mechancial arm and chain, this technique genuinely saves considerably labor price and improve the doing work efficiency seemingly.

Component A:Template total automatic welding line format

Part B:Entire automatic welding line detailed introduction

[Total auto socket welding]

This equipment is utilised for upper cap socket welding and edge welding component polishing.Equip with CZPT YD-350GL4 welder 1 set, water cooling welding CZPT 1 pcs, 8L computerized cycle water cooling tank 1 set.The primary shaft motor is .75KW.Sharpening motor is 1.5KW, equip with the grating security security.

Equip with NO.6 Hydraulic station, 1 set, vane pump, 5.5KW.Location strain:Falling 4 MPa, increasing 9 MPa.

[Full car handle welding]

This device is employed for upper cap hadnle welding.Equip with 3 sets welding torch, 3 welders finish at 1 time.Equip with CZPT YD-350GL4 welders 3 sets, welding CZPT 3 pieces.Major shaft motor is .4KW, with the grating stability safety.

Equip with No.7 hydraulic station, vane pump, 5.5KW.Location stress:Pressing 4MPa, climbing 9MPa.

[Full vehicle base ring welding]

This device is utilized for lower cap bottom base welding, equip with 3 welding torch, 6 welders could be concluded at 2 occasions.Equip with CZPT YD-350GL4 welder 3 sets, welding CZPT 3 piece.Principal shaft motor .4KW, with the grating security safety.

Equip with No.3 hydraulic station, vane pump, 5.5KW, placing force:Pressing 4MPa, growing 10MPa.

[Total auto one head circumference welding]

This device is utilised for cylinder upper shell and reduced shell welding, it adopts seam eyesight monitoring device, computerized imaging to tracking welding seam, welding the circumferential seam instantly, no require of manual intervention.It adopts CZPT 500GS (special) high-velocity pulse MIG welding source.Welding velocity can reach to 1000mm/min.It adopts double inner cooling MIG torch, it is ideal for long time welding.It is outfitted with Supercooler automatic circulating cooling drinking water tank to cooling the welding CZPT circularly.

Semi vehicle welding equipment function

Semi car welding equipment adopt a lot more operators for loading and unloading cylinder halves purpose, while this option is economic system if the spending budget is restricted.

Component A:Template semi auto welding device format

Component B:Semi automobile welding device in depth introduction

——Right after Sale Support

Well timed & Happy oversea installation service

We have rich expertise for oversea set up and commissioning work, we constantly send out the competent engineers for assisting our consumers to operate the equipment effortlessly and swiftly.

—— Our Manufacturing unit Website

Our sturdy machining ability 

Our hired personnel are in excess of 100 for different doing work method, this sort of as milling lathe,  punching machine, heat remedy, grinding machine, trigger we make all device elements by ourselves, we can guarantee the parts top quality by 100%.

Moreover, with sturdy manufacuting capability, we can shipping and delivery each get on time.

—— Firm Introduction

HangZhou Longterm Machinery Systems Co.,Ltd

HangZhou Longterm Machinery Technologies Co.,Ltd is the specialist company of vehicle-welding equipment (MIG, TIG, Magazine, PAW) and automatic welding technique integration, as effectively as related equipment.Owing to highly computerized, simple operation, welding toughness and provider daily life with the identical stainless metal and plate, is widely employed in aerospace, chemical business, equipment, stress vessels, fireplace extinguishers, water heater, enamel drinking water tank, stainless steel items and other industries.

In order to recommend you the correct device, we would like to get the below from you:

– What’s the cylinder dimension you want to make?
– What is the daily ability you want to make ?

—— FAQ:

LPG cylinder production products
Q: What measurement of LPG cylinder your equipment can make?
A: 6kg, 12kg,15kgs and 50kgs LPG cylinder for cooking and other size according customers’ need.

Q: Can you layout devices in accordance LPG cylinder technological drawing?
A: Sure, remember to send out your technical drawing to us.

Q: What are the rewards to choose your machines?
A: Our equipment are sturdy and reputable for long phrase industrial manufacturing
 

###

###

###

###

###

###

###

###

###

###

What Is a Shaft Collar?

A shaft collar is a simple machine component, but its function is important in many power transmission applications. Most commonly, shaft collars are used in motors and gearboxes. They can act as locating components, bearing faces, and mechanical stops. Their compact design makes them easy to install. In addition, they provide a clean, simple look for your gearbox or motor.

Sizes

There are a variety of sizes of shaft collars. Each type has different parameters and requirements. These specifications can be found on the manufacturer’s website. These dimensions are important for the selection process. In order to determine which size is best for your needs, first identify the system parameters and limitations that you’ll be using.
Shaft collars are available in a variety of sizes and materials. These pieces can range in thickness from just a few millimeters to several inches. A solid steel shaft collar is usually available from 1/8″ to six inches. The material used for shaft collars is either 304 stainless steel or lead-free steel.
The oldest style of shaft collar is the set collar, which uses a hardened set screw to penetrate the shaft surface. It is ideal for holding bearings, spacers, and sprocket hubs. These collars are typically installed using hex keys, which are six-sided L-shaped tools, also known as Allen Wrenches. These collars are useful for many different machine applications, and are often used in conjunction with springs and dampers to hold components in place. They are also useful as mechanical stops, stroke limiters, and bearing holders.
Shaft collars come in one-piece and two-piece designs. A one-piece collar provides uniform holding force on the shaft, whereas a two-piece shaft collar is stronger and can be assembled anywhere on the shaft. Shaft collars are generally available in English and metric units, and the manufacturer can alter the dimensions of any standard collar to meet your needs. For more unique situations, you can also choose a fully customized shaft collar that is specific to your application.

Functions

A shaft collar is a metal or plastic device used to locate and position components on a shaft. It also limits the movement of the shaft. These devices can be found on a wide variety of applications, including motor assembly components. There are many types of shaft collars. To help you find the right shaft collar for your application, you can use Thomas Supplier Discovery Platform. The platform has over 70,000 product categories to help you find the right solution.
Clamp-type collars are reliable under constant loads, but may require additional support under shock loads. A shock load is a force generated by a relatively small mass that is rapidly increased by impact. Clamp-style collars are designed to counteract this force, and an undercut on the shaft may help them stay firmly in place. Clamp-style collars are also available in two-piece designs, which offer a high holding force and ease of assembly.
A shaft collar is an important machine component. It holds and positions sprockets on a shaft. It also acts as a mechanical stop, and helps prevent a shaft from slipping. They can also be used to limit the movement of cylinders and actuators. These simple components are found in virtually every type of machinery.
The torque-generating force in a set-screw shaft collar is absorbed by friction between the threads and the clamp body. The friction between these parts helps compensate for the lost torsioning effort, which can lead to the collar failing to hold. Alternatively, a torque wrench can help control the final torque of the shaft collar.

Types

There are many different types of shaft collars available for different applications. It is important to understand the characteristics of each to find the right one for your application. The most common shaft collars are made from steel or aluminum, but some are also made of plastic. These are relatively inexpensive and lightweight, but their holding power is limited. Titanium shaft collars are much lighter than aluminum and are resistant to extreme temperatures, but they are only used in a few specific applications.
Another type is a clamp collar, which is mounted using a compression method. Compared to the set screw type, clamp collars are much stronger and have a higher holding power. Clamp collars come in either a one-piece or two-piece design. One-piece collars are used in applications where the shaft is split and requires a positive stop.
The strength of a shaft collar depends on the type of screw used to attach it to the shaft. The screw’s strength and diameter will affect the holding power of the shaft collar. In most cases, a manufacturer will offer the proper screw with the collar. In some cases, however, a non-standard screw may be more appropriate.
The set screw collar is one of the oldest types. Its disadvantage is that it can be difficult to move and may damage the shaft. Also, it is not as secure as a clamp-based collar. In addition, two-piece hinged shaft collars are the most convenient. One-piece collars are difficult to move, while two-piece collars can be moved easily along the shaft without separating components.

Dimensions

Shaft collars are a complex component and their dimensions are crucial to the performance of the application. Designing a shaft collar requires consideration of a variety of factors, such as the type of material, bore size and geometry of the shaft. The manufacturer of a shaft collar will usually publish performance data on its website, or users can contact them for assistance.
The material used in shaft collars has a significant impact on the collar’s strength and its holding capacity. Shaft collars should be made from a high-quality, corrosion-resistant material. The strength of the screw also plays an important role in the collar’s holding capacity. Generally, a collar’s manufacturer will provide the appropriate type of screw for the application. However, in some cases, a non-standard screw may be necessary.
Shaft collars are available in a variety of styles. One-piece collars are often used in applications where there is minimal or no disassembly or adjustment required. Alternatively, two-piece collars may be used when frequent disassembly is needed. Regardless of the style, the size of shaft collars should be consistent with the requirements of the assembly.
Shaft collars are made from steel or aluminum. They offer good holding power and are lightweight. Steel shaft collars are durable and have good corrosion resistance. However, the grade of steel can affect their performance. Stainless steel collars are easier to machine and have improved corrosion resistance. However, they may reduce the holding power.

Stainless steel

A stainless steel shaft collar is a simple mechanical component used to secure a shaft. It is used for many different applications, most commonly in motors and gearboxes. They also function as locating components, mechanical stops, and bearing faces. These collars are available in different sizes and can be used for a variety of different purposes.
Shaft collars come in various materials, including stainless steel, aluminum, and polyamide. They are available with a variety of different finishes, including electroless nickel plating. Stainless steel shaft collars are available in various diameters, including 5/16 in. through 5/8 in. They are also available in single and double split styles.
CZPT offers a full line of stainless steel shaft collars in both 303 and 316 stainless steel. These collars are resistant to corrosion caused by water and a wide variety of commercial-grade cleaning agents. They are also supplied with fastening hardware of similar material. For added durability, CZPT shaft collars are also available in engineered plastic.
Stainless steel shaft collars can be easily adjusted for the proper torque. They come in various sizes and are easy to install and remove. They can also be re-bored if necessary. One type of shaft collar is quick-clamp, which is equipped with a clamping lever and a handle. It’s ideal for frequent setup and adjustment.

Quick-clamp shaft collars

Quick-clamp shaft collars are a simple and convenient way to secure a shaft. They have a flush handle that sits flush with the outside diameter of the shaft and can be easily adjusted by hand. They are made from lightweight aluminum and stainless steel hardware that does not mar the shaft.
These shaft collars replace standard hardware and are easy to install and remove. Quick-clamp shaft collars are available in one, two, and three-piece clamping styles. Some quick-clamp shaft collars have an integrated hinge and countersunk mounting holes for easy mounting. They can also have a knurled nut for easier locating.
Quick-clamp shaft collars are a convenient option for many types of packaging machinery. They can be installed and adjusted with no tools, making them an efficient choice for frequent changeovers and setups. CZPT offers two types of quick-clamp shaft collars. The first type has a cam lever that sits flush with the outside diameter and is finger operated. The second type has an adjustable tension-adjustment screw for easy adjustment. Both designs are ideal for low-rpm applications where frequent changeovers are needed.
Quick-clamp shaft collars are made of black anodized aluminum and steel fasteners. These shaft collars are available in sizes ranging from 0-300mm and in various designs. A quick-clamp shaft collar has a high load-bearing capacity, and a high torque capacity. Axial load capacities and torque specifications are non-binding guidance values and do not represent a warranty or guarantee of their characteristics.

editor by czh 2023-01-31