Item Description

CZPT Keyless Locking Assembly KLD-two
Medium torque, self-centering, modest cross part, machining tolerance shaft H8, hub H8 Socket head locking screw DIN912-12.nine
Self-centering with excellent concentricity the modest outer diameter is space-saving and suited for little wheel diameters the spacer ring in between the outer flange and the hub maintains the fitting situation in the axial route to allow actual positioning without a shaft collar the press-off threads in the outer flanges are used for dismantling.
 
KLD-2 Interchange with Z11,BIKON 8000,BEA BK80,BONFIX CCE1000,Problem 02,Chiaravalli RCK80,CONEX  B,7110 ECOLOC, Fenlock FLK110,GERWAH PSV2571.1,ITALBLOCK CN55,KTR250,KINLOK LOK10,KBS80,MAV 5061,POGGI CAL-B,RFN7110,Ringspann RLK110,Ringblok 1100,SIT 3,SATI KLCC,TOLLOK TLK110,Tsubaki TF,V-Blok VB800B,Walther Flender MLC3000,Fenner Drive B-Loc B800,LoveJoy SLD1900,SKF FX20,OKBS80,DRIVELOCK80
 
Ubet Locking Aspects KLD-3
Reduced torque, Medium area strain, Taper rings only, Minimal axial and radial dimensions
This clamping established is self-centering with excellent concentricity. The incredibly small outer diameter is place-saving and suitable for modest wheel diameters. The spacer ring in between the outer flange and the hub maintains the fitting placement in the axial direction to permit precise positioning with no a shaft collar. The thrust-off threads in the outer flanges are employed for dismantling.
 
KLD-3 Interchange with Z1,BIKON 5000,BEA BK50,BONFIX CCE3000,Obstacle 03 Chiaravalli RCK50,CONEX  C,Fenlock FLK300,ITALBLOCK CN31,KRT150,KINLOK LOK80,KBS50,KANA three hundred,MAV 3003,POGGI CAL-C,RFN8006,Ringspann RLK300,Ringblok 1060,SIT 2,SATI KLNN,TOLLOK TLK300,Tsubaki EL, ,Walther Flender MLC 2000,Fenner Generate B-Loc B112,LoveJoy SLD350,SKF FX30,OKBS50,DRIVELOCK50
 
Ubet Mechanical Locking Device KLD-4
Large torque, self-centering, medium area stress, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.9
 
KLD-4 Interchange with Z3,BIKON 7000A,BEA BK70,BONFIX CCE4000,Problem 04,Chiaravalli RCK70,CONEX  D,7004 ECOLOC, Fenlock FLK130,GERWAH PSV2007,ITALBLOCK CN54/N,KTR200,KINLOK LOK20A,KBS70,MAV 6901,POGGI CAL-D,RFN7013.,Ringspann RLK130,Ringblok 1300.1,SIT 5A,SATI KLDA,TOLLOK TLK130,V-Blok VK700,SKF FX40,OKBS70,DRIVELOCK70
 
Ubet Shaft Hub Link KLD-5
Medium torque, reduced length, medium self-centering, High surface area pressure, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine
Appropriate for slim, disk-formed wheel hubs. Self-centering and self-locking in the clamping state.
 
KLD-5 Interchange with Z3B,BIKON 1003,BEA BK13,BONFIX CCE4100,Challenge 05,Chiaravalli RCK13,CONEX  DS,7003 ECOLOC, Fenlock FLK132,GERWAH PSV2006,KTR203,KBS13,KANA 201,MAV 1062,POGGI CAL-DS,RFN7013., Ringspann RLK132,Ringblok 1710,SIT 6,SATI KLAA,TOLLOK TLK132,TAS3003,       V-Blok VK160,Walther Flender MLC 5006,LoveJoy SLD1750,SKF FX41, OKBS13, DRIVELOCK13.
 
Ubet Shaft Locking Gadget KLD-6
Medium torque, self-centering, Low surface area stress, No axial hub motion, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.nine
 
KLD-6 Interchange with Z13,BIKON 7000B,BEA BK71,BONFIX CCE4500,Obstacle 06,Chiaravalli RCK71,CONEX  E,7007 ECOLOC, Fenlock FLK131,GERWAH PSV2007.3,ITALBLOCK CN54/S,KTR201,KINLOK LOK20B,KBS71,MAV 6902,POGGI CAL-E,RFN7013.1,Ringspann RLK131,Ringblok 1300.2,SIT 5B,SATI KLDB,TOLLOK TLK131,Tsubaki KE,V-Blok VK700.1,Walther Flender MLC5000B,SKF FX50,OKBS71,DRIVELOCK71
 
Ubet Clamping Energy Lock KLD-seven
Medium torque, diminished size, Substantial floor force, No axial hub motion, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.9 Simultaneous Relationship of Chain Sprocket
 
KLD-7 Interchange with Z8,BIKON 1006,BEA BK16,BONFIX CCE4600,Problem 07,Chiaravalli RCK16,CONEX  ES,7006 ECOLOC,Fenlock FLK133,GERWAH PSV2006.3,ITALBLOCK CN9/4,KTR206,KBS16,KANA 201,MAV 1061,POGGI CAL-ES,RFN7013.1,Ringspann RLK133,Ringblok 1720,SATI KLAB,TOLLOK TLK133,Tsubaki AE,TAS3006,V-Blok VK130,Walther Flender MLC 5007,LoveJoy SLD1750,SKF FX51,OKBS16,DRIVELOCK16
 
Ubet Shrink Disc KLD-fourteen
Higher torque, No axial hub movement, Large pace software, desired resolution for coupling hub and hollow shaft gearbox, DIN931-10.9 screw Sensible-Lock Shrink Disc, Slender Hub Link for sprockets, hook up hollow and sound shafts frictionally and backlash-free.
 
KLD-14 Interchange with Z7B,BEA BK19,BONFIX CCE8000,Problem 14,Chiaravalli RCK19,CONEX  SD, Fenlock FLK603, ,KTR603,KBS19,MAV 2008,RFN4071,Ringspann RLK603,Ringblok 2200,SATI KLDD,TOLLOK TLK603, Tsubaki SL, ,Walther Flender MLC 9050,Fenner Push B-Loc SD10,LoveJoy SLD900,SKF FX190,OKBS19,DRIVELOCK19
 
Ubet Locking Assembly KLD-fifteen
Large torque, self-centering, Lower-medium area stress, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.nine
 
KLD-fifteen Interchange with BEA BK15, Problem 15,Chiaravalli RCK15,CONEX  EP, Fenlock FLK134,KBS15 ,MAV 3061,Ringspann RLK134,SATI KLBB,TOLLOK TLK134, ,SKF FX52,DRIVELOCK15
 
 
Ubet Locking Bushes KLD-sixteen
Medium torque, Diminished size, Medium self-centering, Higher surface strain, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine
 
KLD-16 Interchange with BONFIX CCE4900,Obstacle sixteen,CONEX  L,KTR225,KBS52,SATI KLHH,,SKF FX120
 
 
Ubet Ball Bearing Adapter Sleeve KLD-17
Reduced torque, Short Size, Not self-centering, Low surface area strain, machining tolerance shaft H8, hub H8
 
KLD-seventeen Interchange with BEA BK25, Problem 17, KBS51, SATI KLFC,,SKF FX80
 
Ubet Bearing Adapter Sleeve  KLD-17.one
Lower-medium torque, self-centering, lower floor strain, machining tolerance shaft H8, hub H8
 
KLD-17.1 Interchange with Z19B, BEA BK26,Obstacle 21,Chiaravalli RCK55, Fenlock FLK250,KTR125,KBS55, POGGI CAL-L,Ringspann RLK250,Ringblok 1500, SATI KLFF,TOLLOK TLK250
 
Ubet Shaft Clamping Collar KLD-18
Minimal-medium torque, Quick Length, self-centering, lower area stress, machining tolerance shaft H8, hub H8, socket head Locking screw DIN912-12.nine
This clamping set is self-centering and suited for very modest shaft diameters.     It transfers typical to large torques
 
KLD-17.1 Interchange with BEA BK61,Chiaravalli RCK61,7002 ECOLOC ,GERWAH PSV2061,KTR105,KBS61,MAV 7903,SATI KLSS, Walther Flender MLC 5050,SKF FX350,OKBS61,DRIVELOCK61
 
Ubet Clamping Unit KLD-19
extremely substantial torque, self-centering, medium surface area pressure, no axial hub movement, machining tolerance shaft H8, hub H8,  socket head Locking screw DIN912-12.nine
This clamping set is self-centering with exceptional concentricity. The very tiny outer diameter is area-conserving and suited for modest wheel diameters. The spacer ring amongst the outer flange and the hub maintains the fitting placement in the axial route to empower actual positioning with out a shaft collar.
 
KLD-19 Interchange with Z12A,BIKON 1012,BEA BK11,BONFIX CCE9500,Challenge 19,Chiaravalli RCK11,CONEX  F,7005 ECOLOC,Fenlock FLK400,GERWAH PSV2005,ITALBLOCK CN911,KTR400,KINLOK LOK40,KBS11,MAV 4061,POGGI CAL-F,RFN7015,Ringspann RLK400,Ringblok 1800,SIT 4,SATI KLEE,TOLLOK TLK400,Tsubaki Ad,TAS3012,V-Blok VK112,Walther Flender MLC 4000/MLC 7000,Fenner Generate B-Loc B112,LoveJoy SLD2600,SKF FX60,OKBS11,DRIVELOCK11
 
Ubet Clamping System  KLD-33 interchange with Z4, RFN7014
 
Ubet Locking Device KLD-34 interchange with  Z5,BIKON 1015./1015.1, 7009 ECOLOC,Fenlock ,GERWAH PSV2009, KTR401,MAV 1008,RFN7015.,Ringspann RLK401,Ringblok 1810,TOLLOK TLK451,TAS3015./3015.1,

Keyless Locking Devices are also call as below 
1.     Welle-Nabe-Verbindungen
2.     Wellenspannsaetze,
3.     Spannsaetze, 
four.     Taper Spannbuchsen,
five.     Taper Lock, 
6.     Keyless Locking System,
7.     Keyless Locking  Assembly,
eight.     Keyless Shaft Locking Device,
9.     Keyless Shaft Hub Locking Device,
ten.  Keyless Bushings,
11.  Keyless Shaft Hub Link,
twelve.  Clamping Sleeve,
thirteen.  Clamping Factor,
14.  Clamping Collar,
fifteen.  Clamping Bush,
16.  Clamping Gadgets,
seventeen.  Clamping Set,
18.  Clamping Power Lock,
19.  Cone Clamping Component,
twenty.  Shaft Clamping,
21.  Shaft Correcting,
22.  Shaft Fixing Cone Clamping Aspect, 
23.  Conical clamping rings, 
24.  Shaft Lock Clamping Element,
twenty five.  Shaft Clamping Element,
26.  Shaft Clamping Collar,
27.  Shaft Locking Device,
28.  Shaft Hub Link,
29.  Shaft Hub Locking Unit,
30.  Shaft Hub Locking Assembly,
31.  Shaft Lock,
32.  Silted Clamping Element,
33.  Shaftlock Clamping Factor,
34.  Locking Assembly,
35.  Locking Bushes,
36.  Locking Rings,
37.  Rigid Shaft Coupling,
38.  Rigid Shaft Coupler,
39.  Rigid Ring Block,
40.  Ring Shaft Lock, 
forty one.  Ringblock Locking Assemblies,
forty two.  Gear Wheel Link,
forty three.  Zinc Plated Locking Units, 
forty four.  Nickel Plated Locking Assembly,
45.  Mechanical Locking System, 
46.  Mechanical shaft lock,
forty seven.  Schrumpfscheibe,
48.   External Locking Assembly,
forty nine.  Narrow Hub Link for Sprockets,
fifty.  Shrink Disc, 
fifty one.  Brake Disc, 
fifty two.  Shrink Disk,
fifty three.  External Locking Assembly Mild Duty, 
54.  Shrink Discs Regular Duty, 
fifty five.  Shrink Disks Weighty Duty, 
fifty six.  Smart-Lock Schrumpfscheibe, 
fifty seven.  Smart-Lock Shrink Disc, 
fifty eight.  Bearing Adapter Sleeve, 
fifty nine.  Lock Nut,
sixty.  POWER NUT, 
61.  POWER Link, 
sixty two.  Shaft Self-Lock Ring Nut, 
63.  Nickel Plated Locking Units,  
64.  Zinc Plated Locking units, 
sixty five.  Stainless Steel Locking Products.

Ubet Equipment is also competetive on these electrical power transmission components.

Clamp electrical power lock, Energy Lock, Locking Assembly, Locking unit is a keyless shaft-hub locking gadgets for connecting hubs and shaft with large torque transmission, are linker utilized among shafts and pulley, which can substitute the one essential and spline.
They can transmit torque through a established of tightening screw with higher toughness, which can make the necessary clamping force between the internal rings and shaft, also in between the outer ring and hub. It truly is simple assmebling and diassembling.
They have a very good interchangeablity. The screw are with high energy.
Electricity lock have numerous merchandise
We create by CNC device
Their main substance is exceptional metal.
Right after machining, they will have sleek and gorgeous area, have extended lifestyle time and high toughness.

1. Global common Energy Lock
two. Most well-known on European marketplace
3. Steel 42CrMo4 / 4140 C45E / 1045
We are a top maker of Energy Lock in China. A lot more than 65% of our items are exported to West Europe and 20% to North The us. We assure superb good quality merchandise with competitive value in China.
Our Energy Lock are interchangeable to:
Ringfeder, Tollok, Chiaravalli, Sati, Challenge, Bonfix, Compomac, V-Blok, Ringblok, Kana, KTR
GB STHangZhouRD: Z1, Z2, Z3, Z3 For a longer time, Z4, Z5, Z6, Z7B, Z8, Z11, Z12A, Z13, Z14, Z19A, Z19B
RINGFEDER GERMANY STHangZhouRD: RFN4071, RFN7012, RFN7013, RFN7110, RFN8006
TSUBAKI JAPAN STHangZhouRD: AS, TF, EL, SL, Ad
CHIARAVALLI ITALY STHangZhouRD: RCK11, RCK13, RCK15, RCK16, RCK19, RCK40, RCK45, RCK50, RCK55, RCK70, RCK71, RCK80, RCK95
TOLLOK ITALY STHangZhouRD: TLK110, TLK130, TLK131, TLK132, TLK133, TLK134, TLK200, TLK300, TLK400, TLK603
RINGSPANN GERMANY STHangZhouRD: RLK130, RLK132, RLK133, RLK200
BIKON GERMANY STHangZhouRD: 1003, 1006, 1012, 4000, 5000, 7000A, 7000B, 8000
BONFIX STHangZhouRD: CCE1000, CCE2000, CCE3000, CCE4000, CCE4100, CCE4500, CCE4600, CCE4900, CCE8000, CCE9500
SATI STHangZhouRD: KLGG, KLCC, KLNN, KLDA, KLAA, KLDB, KLAB, KLPP, KLBB, KLHH, KLEE, KLFF, KLMM
COMPOMAC STHangZhouRD: A, B, C, D, ES/DS, EP, SD, F
VBLOK STHangZhouRD: VK400, VK800B, VK700, VK160, VK700.1, VK130, VK112
RINGBLOK STHangZhouRD: 1060, 1100, 1120, 1710, 1720, 1800
KANA STHangZhouRD: 200, 201, three hundred
KTR STHangZhouRD: KTR100, KTR150, KTR200, KTR201, KTR203, KTR206, KTR225, KTR250, KTR400, KTR603
Function
one. Effortless to set up and dismantle.
two. Higher degree of flexibility
3. Prolonged lifetime and large effective transmitting
4. Minimal notching effect
5. Protection of the pricey equipment below above load managing.
six. In compliance with quality necessity of created coutries.
seven. Super higher good quality with least expensive price tag.
Clamp electricity lock, keyless locking system, locking unit, shaft locking assemblies, keyless shaft locking gadget, keyless shaft-hub locking unit, lock gadget

###

###

###

###

###

###

Types of Shaft Collars

A shaft collar is a simple machine component that plays a critical role in power transmission. It is typically found in gearboxes and motors, and serves as a bearing face, mechanical stop, and locating component. Its simple design makes it easy to install and use. Its various functions make it a useful machine part for many applications.

Set screw shaft collars

Set screw shaft collars are used in many different applications and can be manufactured in a variety of materials. Typical materials include carbon steel, stainless steel, platinum, silver, nylon, polysulphone, PTFE, and PVC. Collars are easy to install and adjust. A variety of secondary services are available, including internal forming, chroming, and passivating.
Set screw shaft collars come in different styles, including standard collars, quick-release collars, split collars, and threaded collars. They can be purchased in standard and metric sizes, and are available in a variety of finishes. Standard collars are available in steel and stainless steel and have a zinc plated or black oxide finish.
Set screw shaft collars are an excellent choice for holding power transmission components in place and limiting shaft movement. They are held in place by a set screw that digs into the shaft material, providing holding power. They are available in both 303 and 316 Stainless Steel, making them a reliable and efficient choice for a variety of applications.

Clamping-style shaft collars

Clamp-style shaft collars are a versatile alternative to set-screw collars. They eliminate the problems associated with the set-screw collar, such as the possibility of shaft damage. They also lock in place by compressing against the shaft. This method distributes the force on the collar and shaft evenly, creating a stronger holding power.
Shaft collars are manufactured by many companies. You can buy them in-store or online, but it is important to buy from a reputable manufacturer. Many counterfeit collars endanger the life of your machine. Choosing a quality collar will help you avoid costly and time-consuming machine breakdowns.
Clamping-style shaft collars come in a variety of sizes and types. Some of them have a hex or D-bore. Some have circular grooves to assist with installation. They can be found in bore sizes from 1/4″ to one inch. They are often used for mounting gears, sprockets, and bearings.
Two-piece clamp collars are an excellent choice for high-load applications. They have improved clamping force and impressive holding power, and can be easily installed without major disassembly. Two-piece clamp collars can also be designed with a keyway to secure a keyed shaft. There are also special double-wide clamp collars for high axial load applications.
Another type of shaft collar is the quick clamping collar. It is an excellent choice for applications where you want to make frequent setup and adjustments. It allows for easy adjustments with minimal tools. Quick clamping collars feature a cam lever and a clamping lever. They are convenient and highly flexible, making them ideal for use in many industries.

Single split shaft collars

A single split shaft collar is designed to fit one shaft and eliminate two pieces. This makes installation and disassembly easy, reducing labor and downtime. It also uses a full seating torque of the set screws to distribute forces evenly around the shaft circumference, providing stronger holding power. It can be used on a wide range of rotating equipment.
Single split shaft collars are available from CZPT Products. They are a common, high-quality way to secure a shaft. They wrap around the shaft for a secure and tight fit. They are also a versatile option that can be easily removed. These collars can be used on both hard and soft standard round shafts. They provide superior grip compared to solid collars, provide tremendous axial force, and minimize shaft distortion.
Single split shaft collars are one of the many types of bearing shaft locking collars. They are made of EN8 steel, and come with a locking setscrew. This makes installing the collar quick and easy. The collar is available in many sizes, including small, medium, and large. If you do not find the right fit, you can also have one custom-made.
These collars are commonly used for mounting fixtures, sensors, and other assemblies. They are available in two-piece and one-piece styles, and have higher holding power than standard shaft collars. They are available in a wide range of materials, including 1215 lead-free steel, 303 stainless steel, and lightweight 2024 aluminum.

Aluminum shaft collars

The CZPT company produces Aluminum shaft collars for a variety of applications. These shaft collars feature a proprietary manufacturing process to ensure accurate face-to-bore perpendicularity. This helps to improve clamping forces and installation fit. Each collar features the CZPT name stamped on it, and the collar is finished with a black oxide process to achieve a fine glossy finish. The shaft collars are available in a variety of bore sizes and styles, and can be ordered in single or two-piece styles. Additionally, they are manufactured with a high-grade forged screw, which ensures the highest quality.
Aluminum shaft collars can be customized to fit your needs. Several accessories can be added to the shaft collar, such as steel mending plates. Those who need extra load capacity can select a keyed shaft collar. They are also available in lightweight styles. These shaft collars are easy to install and disassemble, and are made from two-piece aluminum for ease of installation.
Choosing the right shaft collar material is critical to the success of your application. You should consider steel, stainless steel, or aluminum for the best corrosion resistance. Steel is stronger and offers better holding power, while aluminum offers a lower weight and a favorable strength-to-weight ratio. When selecting shaft collars, it is important to take into consideration the corrosion resistance of each material. For example, carbon steel shaft collars will not be as corrosion resistant as aluminum shaft collars, but they are lighter and have a good hold power.

Carbon steel shaft collars

Carbon steel shaft collars are a versatile solution to holding bearings in place. They are available in a range of diameters and styles to meet your application needs. They can be used for many different applications, from aerospace and military applications to marine and automotive applications. These collars are available in a variety of materials, including carbon steel, aluminum, and stainless steel.
Carbon steel shaft collars are a cost-effective alternative to stainless steel shaft collars. CZPT manufactures lead-free carbon steel shaft collars, and they are also available with RoHS-compliant yellow zinc plating. Zinc plating is less expensive than stainless steel and is an excellent anti-corrosive option. CZPT yellow zinc collars are plated by a trivalent process rather than a non-compliant hexavalent process.
Shaft collars are available in both metric and inch bore sizes. They can be used for a variety of applications and are typically available in sizes ranging from 1/4″ to three inches. They are also available with metric screws in a range of sizes, which are useful for retrofitting equipment.
Shaft collars are available in a variety of materials, including carbon steel, 303 stainless steel, and aluminum. Some options feature threads and can be welded or bolted to shafts. For more advanced applications, aluminum threaded shaft collars can be used. They are often used for mounting sensors, fixtures, and other assemblies. They come in several styles, such as double-wide, heavy-duty, and threaded.

Hinge shaft collars

Hinge shaft collars are fastening devices that secure shafts or axles. They come in a wide range of sizes, shapes, and materials. These collars can be used in a wide range of applications, including non-rotary applications. They can be manufactured in stainless steel, 1018 steel, aluminum, and brass.
Shaft collars are simple to use but can perform a variety of functions. Their primary functions include holding components in place, locating components on a shaft, and establishing attachment between the shaft and another component. To choose the right collars for a specific application, designers should consider the design, style, materials, bore size, and geometry of the shaft. They should also consider any limitations or requirements associated with the application.
Hinge shaft collars are available in round and square bores. They are most commonly used in agricultural applications. Their size makes them easy to install, and their design makes them suitable for both large and small shafts. They are also used in situations where shafts are not easily accessible. Some types of shaft collars feature flat surfaces, which are great for mounting applications and splitting hubs.
Heavy duty shaft collars are also available. These collars have larger outer diameters, wider bores, and larger screw diameters. They are manufactured from lead-free steel with a proprietary black oxide finish.

editor by czh 2023-01-28