Shaft Worm Transmission Reductor Applied for Worm Gearbox Notes: If you are not sure of the Model, please consult us by message and tell me your motor type. We will give you professional advice. Thanks.

Structure

Materials:
Worm: inner is nodular cast iron, outside is #94 bronze
Wheel: 20Crmoti steel (Carburizing)
Output shaft: #45 steel raw materal
Bearing: UBC brand
Housing: aluminum with oven painting for NMRV030-090, cast iron for NMRV110 and 130
Oil seal: CZPT AND NAK

Characteristics:(1)Large output torque(2) Safe, reliable, economical and durable(3) Stable transmission, quiet operation(4)High heat-radiating efficiency, high carrying ability(5) Combination of 2 single-step worm gear speed reducers, meeting the requirements of super speed ratio

Technical data:(1) Iput power:0.06kw-15kw(2) Output torque:4-2320N.M(3) Speed ratio: 5/10/15/20/25/30/40/50/60/80/100(4) With IEC input flange: 56B14/71B14/80B5/90B5…

Color:(1) Blue / Light blue(2) Silvery White
Quality control(1) Quality guarantee: 1 year(2) Certificate of quality: ISO9001:2000(3) Every product must be tested before sending

Operation&mantenance

(1)When worm speed reducer starts to work up to200-400 hours, its lubricant should be replaced.(2)The gearbox need to replace the oil after 4000 hours.(3)Worm reduction gearbox is fully filled with lubricant oil after finshed assembly.(4)Lubricanting oil should be kept enough in the casing and checked at a fixed time.

Models:

Dimension

Mounting Positions

Packaging & ShippingInner packing: pp bag with cartonOuter packing: Wooden caseShipment:20days after received the deposit

Company Information
HangZhou Wanxing reducer Co., Standard Flexible Welted Universal Cardan Shaft welded universal joint coupling Ltd is established in 1999 and is a professional manufacturer and supplier of NMRV,VF,WP,PLANETARY gearbox/reducer. It is located in HangZhou City of China,with easy access to air port and sea port.
Our company now opeartes with more than 100pieces of equipment and pass the ISO9001:2000 certification. In order to improve our products,we’ve established a research and development department with experienced technicians. We also take part in some exhibitions such as the Cantan fair,the Hannover Mess.

CertificationsEC Declaration of conformity

Our ServicesAs a result, we can provise both standard and non-standard NMRV gearboxed to meet customer’s requirements.
1.High quality product—-Our tenet is “quality first”.Good material,precise manufacturing processes
and strict quality control can create excellent quality.
2.Competitive price—-We have our own factory,scientific producing, Economical Custom ATV Roller Bearing Driven Belt Pulley Comp Driven direct-selling.So we can save the cost and supply low price.
3.Professional—-Our professional engineer can answer technical questions,help you solve technical problems and help you choose the most suitable product according to your requirements.
4.Delivery fast—-We are near port,and we have professional forwarder.Goods can be sent out within 1 to 10 working days based on order quantity.
5.Best service—-Answering e-mails or solving questions timely.Delivery and update information on time.
FAQ
1, Q: What’s your business type?A: Manufacturer2, Q: What’s your main products?A: Power transmission gearboxes and gears.Such as: industrial HB gearbox, worm/helical/bevel/planetary gearbox, customed gears, etc.3, Q: What about your warranty?
A:12 to 18 months warranty according to different products and lifetime service.4, Q: What’s your MOQ?A: 1 piece for different gearboxes.
5, Q: Can you supply customized gearboxes or gears?
A: Yes, we can. Mostly depend on your requirements.
6, Q: What information should be given, 5060708095710 Single Bearing Sliding Door Roller with External Bracket Y U V Groove Sliding Gate Wheel if I want to buy gearbox?
A: Gearbox ratio, type, input speed, rated power, Mounting position, More details, better!

7,Q:What about the payment?
A:T/T 30%advance,balance against copy B/L(L/C at sight can be accept)

8,When you can get our reply after inquiry?
A:We have professional team do work for different customers, so you can be sure to get the reply within 24 hours.

Dear friends, if you are interested in any models of us, High Quality M28x1.5 Drive Shaft Nut OEM 235714290 Wheel Bearing Nut for CV Joint pls contact us, we will reply you within 24 hours,expecting your mail.

Worm Gear Motors

Worm gear motors are often preferred for quieter operation because of the smooth sliding motion of the worm shaft. Unlike gear motors with teeth, which may click as the worm turns, worm gear motors can be installed in a quiet area. In this article, we will talk about the CZPT whirling process and the various types of worms available. We’ll also discuss the benefits of worm gear motors and worm wheel.

worm gear

In the case of a worm gear, the axial pitch of the ring pinion of the corresponding revolving worm is equal to the circular pitch of the mating revolving pinion of the worm gear. A worm with one start is known as a worm with a lead. This leads to a smaller worm wheel. Worms can work in tight spaces because of their small profile.
Generally, a worm gear has high efficiency, but there are a few disadvantages. Worm gears are not recommended for high-heat applications because of their high level of rubbing. A full-fluid lubricant film and the low wear level of the gear reduce friction and wear. Worm gears also have a lower wear rate than a standard gear. The worm shaft and worm gear is also more efficient than a standard gear.
The worm gear shaft is cradled within a self-aligning bearing block that is attached to the gearbox casing. The eccentric housing has radial bearings on both ends, enabling it to engage with the worm gear wheel. The drive is transferred to the worm gear shaft through bevel gears 13A, one fixed at the ends of the worm gear shaft and the other in the center of the cross-shaft.

worm wheel

In a worm gearbox, the pinion or worm gear is centered between a geared cylinder and a worm shaft. The worm gear shaft is supported at either end by a radial thrust bearing. A gearbox’s cross-shaft is fixed to a suitable drive means and pivotally attached to the worm wheel. The input drive is transferred to the worm gear shaft 10 through bevel gears 13A, one of which is fixed to the end of the worm gear shaft and the other at the centre of the cross-shaft.
Worms and worm wheels are available in several materials. The worm wheel is made of bronze alloy, aluminum, or steel. Aluminum bronze worm wheels are a good choice for high-speed applications. Cast iron worm wheels are cheap and suitable for light loads. MC nylon worm wheels are highly wear-resistant and machinable. Aluminum bronze worm wheels are available and are good for applications with severe wear conditions.
When designing a worm wheel, it is vital to determine the correct lubricant for the worm shaft and a corresponding worm wheel. A suitable lubricant should have a kinematic viscosity of 300 mm2/s and be used for worm wheel sleeve bearings. The worm wheel and worm shaft should be properly lubricated to ensure their longevity.

Multi-start worms

A multi-start worm gear screw jack combines the benefits of multiple starts with linear output speeds. The multi-start worm shaft reduces the effects of single start worms and large ratio gears. Both types of worm gears have a reversible worm that can be reversed or stopped by hand, depending on the application. The worm gear’s self-locking ability depends on the lead angle, pressure angle, and friction coefficient.
A single-start worm has a single thread running the length of its shaft. The worm advances one tooth per revolution. A multi-start worm has multiple threads in each of its threads. The gear reduction on a multi-start worm is equal to the number of teeth on the gear minus the number of starts on the worm shaft. In general, a multi-start worm has two or three threads.
Worm gears can be quieter than other types of gears because the worm shaft glides rather than clicking. This makes them an excellent choice for applications where noise is a concern. Worm gears can be made of softer material, making them more noise-tolerant. In addition, they can withstand shock loads. Compared to gears with toothed teeth, worm gears have a lower noise and vibration rate.

CZPT whirling process

The CZPT whirling process for worm shafts raises the bar for precision gear machining in small to medium production volumes. The CZPT whirling process reduces thread rolling, increases worm quality, and offers reduced cycle times. The CZPT LWN-90 whirling machine features a steel bed, programmable force tailstock, and five-axis interpolation for increased accuracy and quality.
Its 4,000-rpm, 5-kW whirling spindle produces worms and various types of screws. Its outer diameters are up to 2.5 inches, while its length is up to 20 inches. Its dry-cutting process uses a vortex tube to deliver chilled compressed air to the cutting point. Oil is also added to the mixture. The worm shafts produced are free of undercuts, reducing the amount of machining required.
Induction hardening is a process that takes advantage of the whirling process. The induction hardening process utilizes alternating current (AC) to cause eddy currents in metallic objects. The higher the frequency, the higher the surface temperature. The electrical frequency is monitored through sensors to prevent overheating. Induction heating is programmable so that only certain parts of the worm shaft will harden.

Common tangent at an arbitrary point on both surfaces of the worm wheel

A worm gear consists of two helical segments with a helix angle equal to 90 degrees. This shape allows the worm to rotate with more than one tooth per rotation. A worm’s helix angle is usually close to 90 degrees and the body length is fairly long in the axial direction. A worm gear with a lead angle g has similar properties as a screw gear with a helix angle of 90 degrees.
The axial cross section of a worm gear is not conventionally trapezoidal. Instead, the linear part of the oblique side is replaced by cycloid curves. These curves have a common tangent near the pitch line. The worm wheel is then formed by gear cutting, resulting in a gear with two meshing surfaces. This worm gear can rotate at high speeds and still operate quietly.
A worm wheel with a cycloid pitch is a more efficient worm gear. It reduces friction between the worm and the gear, resulting in greater durability, improved operating efficiency, and reduced noise. This pitch line also helps the worm wheel engage more evenly and smoothly. Moreover, it prevents interference with their appearance. It also makes worm wheel and gear engagement smoother.

Calculation of worm shaft deflection

There are several methods for calculating worm shaft deflection, and each method has its own set of disadvantages. These commonly used methods provide good approximations but are inadequate for determining the actual worm shaft deflection. For example, these methods do not account for the geometric modifications to the worm, such as its helical winding of teeth. Furthermore, they overestimate the stiffening effect of the gearing. Hence, efficient thin worm shaft designs require other approaches.
Fortunately, several methods exist to determine the maximum worm shaft deflection. These methods use the finite element method, and include boundary conditions and parameter calculations. Here, we look at a couple of methods. The first method, DIN 3996, calculates the maximum worm shaft deflection based on the test results, while the second one, AGMA 6022, uses the root diameter of the worm as the equivalent bending diameter.
The second method focuses on the basic parameters of worm gearing. We’ll take a closer look at each. We’ll examine worm gearing teeth and the geometric factors that influence them. Commonly, the range of worm gearing teeth is one to four, but it can be as large as twelve. Choosing the teeth should depend on optimization requirements, including efficiency and weight. For example, if a worm gearing needs to be smaller than the previous model, then a small number of teeth will suffice.