Product Description
Agrucultural Wheel Hub Unit 42 0571 /Spare Parts/Agricultural Parts/Hub Unit
Technology utilized for the production of the bearings provides significant advantages to customers due to minimal maintenance costs. Each bearing should have longer life span and should operate without any problems during the exploitation. However, it should be noted that certain external factors affect the quality of bearings as well. They should not be exposed to excessive heat and must be protected from ingress of foreign matter. Also, Bearings must be properly lubricated.
Modern ball bearings stand up to growing demands of operation in difficult conditions with increased productivity. Further development trends set demands for longer exploitation life under harsh conditions and more cost-effective design for agricultural machinery. CZPT bearings provide cost-effective solutions and are extensively applied in agricultural machinery production. These bearings are quick and easy to mount. Wide inner ring can be mounted on the shaft by the eccentric ring, screws or adapter sleeves. Seals are specially designed and fitted to the outer rings. The advantages of these bearings have led to their rapid adoption by manufacturers of agricultural machinery.
Each CZPT bearing is produced in accordance with strict premium quality standards.
-VAFEM bearing units consist of a housing which is made from either cast iron or pressed steel; The insert bearings inside have a self-aligning feature due to their spherical outer diameters and the corresponding design of the bearing housing. This feature allows for any static misalignment.
-Wider inner ring, hex bore, square bore, pressed housing, paint or zinc plating, double row and so on are available for better anti-corrosion performance.
–Various seals design is available, typically single, triple lips, as well as 6 lips are available based on different bearing arrangement and requirements for each application.
-Rings and ball Material, Rubber Seal, Grease, as well as internal design of bearings are carefully selected.
– When low temperature is required, we have solution to meet with it.
-When axial load is required, we have design of 4 point contact bearing to meet with it.
Also we can also provide design solution to meet with customer requirements, and we have been proven successful in helping OEM customers to provide comparable performance with more economical CZPT bearings.
Agricultural wheel hub unit
BAA00006 |
BAA0012 |
BAA0013 |
BAA0026 |
BAA571 |
BAA0037 |
8395.TDA.4.05.015-1R 5554502 5554503 PL-185-M30-L PL-185-M30-R |
M4340 0571 MG-4340 0571 M4340571R |
NO. | SKF CODE | APPLICATION | OEM CODE AND REFERENCE CODE |
1 | BAA0003 | DISC HARROW | |
2 | BAA0003A | DISC HARROW | |
3 | BAA0004 | ||
4 | BAA0005 | DISC HARROW | |
5 | BAA00006 | DISC HARROW | |
6 | BAA00009 | DISC HARROW | |
7 | BAA0012 | DISC HARROW | |
8 | BAA0013 | DISC HARROW | |
9 | BAA571 | DISC HARROW | |
10 | BAA0571 | DISC HARROW | |
11 | BAA0026 | DISC HARROW | |
12 | BAA571 | DISC HARROW | |
13 | BAA0037 | DISC HARROW | |
14 | VÄDERSTAD 42 0571 | PL140 18007 42 0571 |
|
15 | Horsch Joker RT. Focus,Terrnao | PL127 2857100 |
|
16 | Horsch | 23246700 28042000 |
|
17 | Horsch | 34189000 | |
18 | Horsch | 35115400 | |
19 | PN70042 | ||
20 | MASCHIO GASPARDO | 8395.TDA.4.05.015-1R 5554502 5554503 PL-185-M30-L PL-185-M30-R |
|
21 | Lemken MASCHIO GASPARDO Maschio AQUILA RAPIDO Series, 4600, 5000, 6000, JUMBO Series, 6000, 7000, 8000, MEGA RAPIDO Series, 3000, 3500, 4000, 4500, 5000, TORO RAPIDO Series, 4600, 5000, 6000, 7000 |
M4340 0571 MG-4340 0571 M4340571R |
NO. | Model Number | Sample Stock qty | Seal Structure | Bore shape | Eccentric collar | Note |
29 | 207KRRB17 | 2 | Three lip seal | circular | / | |
30 | 209KRRB2 | 1 | Iron bonding | hexagonal | / | |
31 | 210RRB6 | 1 | Three lip seal | hexagonal | / | |
32 | CSA207-22 | 2 | Iron bonding | circular | with | |
33 | F208G | 1 | / | / | / | only housing |
34 | GW211PP3 | 2 | Three lip seal | square | / | |
35 | GW211PPB2 | 2 | Three lip seal | circular | / | |
36 | NA206NG | 1 | Iron bonding | circular | with | |
37 | SA207-20G | Iron bonding | circular | with | no sample stock | |
38 | SA207NG | 2 | Iron bonding | circular | with | |
39 | SA208-24NG | Iron bonding | circular | with | no sample stock | |
40 | SAAK205-16G | 1 | Iron bonding | circular | with | with bearing housing |
41 | SBAK205-16G | 1 | Iron bonding | circular | / | with bearing housing |
42 | SBLF206-20G | 1 | Iron bonding | circular | / | with bearing housing |
43 | W208PPB12 | 1 | Three lip seal | square | / | |
44 | W208PPB16 | 2 | Three lip seal | hexagonal | / | |
45 | W208PPB7 | 2 | Three lip seal | circular | / | |
46 | W210PPB5 | 2 | Three lip seal | circular | / | |
47 | UCF208-24 | 1 | Iron bonding | circular | / | with bearing housing |
48 | FD211RBA | 2 | Three lip seal | circular | / | with pressed steel housing |
49 | W208PP10 | 2 | Three lip seal | circular | / | |
50 | DC209TTR10 | 2 | Iron bonding | circular | / | |
51 | YET205-100-RSNC | 2 | Iron bonding | circular | / | one side sealed while another open |
52 | W210PP4 | 2 | Three lip seal | square | / | 2/ 2.6N.M |
53 | 205DDS | 2 | Three lip seal | circular | / | |
54 | W208PPB5 | 1 | Three lip seal | square | / | developed for customer |
55 | NA208-24G | 1 | Three lip seal | circular | with | developed for customer |
56 |
202KRR7 | 204KRR2 | 205KRR2 | 206KRR2 | 207KRR | 209KRR3 |
202NPP9 | 204KRRB2 | 205KRRB2 | 206KRRB2 | 207KRR14 | |
202RRE | 204KRD4 | 205KRRAH03 | 206GGB | 207KYY | |
204KRR14 | 205KRR6 | 206GGH | 210KRR | ||
204RR8 | 205KRR7 | 206KRR8 | |||
W203PP | Z9504RST | 205KP6 | 206KRRB | 208KRR2 | |
203KRR | 204RY2 | 205KP8 | 206KRD4 | 208KRR4 | 212KRR |
BB203KRR2 | 203PY3 | 205KR3 | 206KP2 | 208KP2 | |
203KRR2 | Z9504AB | 205KRP2 | 206KPP16 | 208KR4 | |
203KRR2A | Z9504B | 205KYY3 | 206KPR4 | W208PP | |
203KRR5 | Z9504C | 205PP8 | 6206-TNE-18 | W208PPR | |
203KRR6 | 204BBAR | 205PP9 | AA28184 | ||
203KRR7 | 204FREN | 205PP10 | |||
203JD | 204KPP2 | 205PP12 | |||
203KRR3 | 205PPB7 | ||||
203NPP9 | G205PPB7 | ||||
5203KYY2 | 205RVA | ||||
205GP | |||||
205DDS |
W208PP5 | GW208PPB6 | W209PPB2 | W210PP2 | W211PP2 | W214PP2 | |
W208PP6 | GW208PPB8 | W209PPB4 | W210PP8 | W211PP3 | W214PPB2 | |
W208PP7 | GW208PPB12 | W209PPB5 | W210PP4 | W211PP5 | W214PPB9 | |
W208PP8 | GW208PP17 | GW209PPB2 | 5AC10 | -1 15/16 | W211PP30 | GW214PP2 |
W208PP10 | GW208PPB17 | GW209PPB4 | W210PPB2 | W211PP34 | GW214PPB2 | |
TCS25-24 | GW209PPB5 | W210PPB4 | W211PPB2 | GW214PPB3 | ||
W208PPB2 | GW209PPB8 | W210PPB5 | W211PPB3 | GW214PPB4 | ||
W208PPB4 | GW209PPB11 | W210PPB6 | W211PPB6 | GW214PPB5 | ||
W208PPB5 | GW210PP3 | GW211PP2 | GW214PPB6 | |||
W208PPB6 | GW210PP4 | GW211PP3 | 3AC14-1 | |||
W208PPB7 | GW210PPB2 | GW211PP17 | GW216PP2 | |||
W208PPB8 | GW210PPB4 | GW211PPB2 | GW216PP5 | |||
W208PPB9 | GW210PPB5 | GW211PPB3 | GW216PPB2 | |||
W208PPB10 | GW211PPB8 | GW216PPB3 | ||||
W208PPB11 | GW211PPB9 | |||||
W208PPB12 | GW211PPB10 | |||||
W208PPB13 | GW211PPB13 | |||||
W208PPB23 | GW211PPB14 |
ST208 | ST209-1 | 1/8 | DHU30S-209 | FD210R | DHU40S-211 | FD211RJA | |
ST208-1N | ST209-45R | DHU40R-209 | FD210-1 1/8SQ | DHU50R-211 | FD211RKA | ||
ST491 | DHU45R-209 | DHU55R-211 | FD211RKB | ||||
ST491A | DHU | 1 1/2R-209 | DHU | 1 1/2S-211 | FD211RM | ||
ST491B | DHU | 1 1/8S-209 | DHU | 1 3/4R-211 | FD211RP | ||
FD209RA | DHU | 1 3/4R-209 | DHU | 2 3/16R-211 | ST211 | ||
FD209RB | DHU | 1 1/4S-209 | FD211-1 1/2SQ | ST211-40S | |||
FD209RJ | FD211-1 3/4SQ | ST211-50R | |||||
FD209RJA | FD211-1 3/4HX | ST211-55R | |||||
FD209RE | FD211-1 15/16RD | ST211-1 | 1/2 | ||||
FD209RK | FD211-1 15/16RDC | ST211-1 | 3/4 | ||||
FD209RM | FD211-2 3/16RD | ST211-2 | 3/16 | ||||
FD209-1 | 1/8SQ | FD211RBA | ST211-2 | 15/16 | |||
FD209-1 | 1/4SQ | FD211REA | ST740 |
Type: | Agricultrual Bearings |
---|---|
Usage: | Agricultural Products Processing, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying |
Material: | Chrome Steel & Iron Casting |
Power Source: | Gasoline |
Weight: | 5lbs |
After-sales Service: | Quick Response |
Customization: |
Available
| Customized Request |
---|
Types of Shaft Collars
Quick-clamp shaft collars
Quick-clamp shaft collars are a convenient option for tightening and loosening shafts. Unlike traditional bolts, quick clamps do not require any tools to install and adjust them. These collars come with flush handles and are designed to reduce production downtime. They also feature high-strength tension adjustment screws for compatibility with a wider range of shaft tolerances.
Quick-clamp shaft collars are offered in a variety of styles. CZPT, for example, offers a unique style of quick-clamp shaft collars with an integral lever. This lever sits flush against the outside diameter and is finger actuated. In addition, this design includes a tension-adjustment screw that can be adjusted according to the application’s requirements. Another style of quick-clamp shaft collar is a one-piece clamping collar with an integrated handle. It is ideal for low-rpm applications, and is designed to be a quick and simple solution for frequent shaft changeovers.
Quick-clamp shaft collars have an adjustable locking force generated by an eccentric lever and are very easy to install. They are available in one and two-piece clamp-type styles, and come in more than thirty standard sizes. They are available with round, square, and threaded bores. Additionally, you can choose to have them painted or customized.
Single split shaft collars
Single split shaft collars are a common choice for new installations. They provide easy installation and disassembly, which helps to minimize labor and downtime. They are also designed with full seating torque of the set screws, which evenly distributes forces throughout the shaft circumference. As a result, they provide greater holding power.
These shaft collars are available in various materials. They are typically made from different types of steel, including stainless steel and aluminium steel. They can also be made from nylon. The latter is available with different finishes, including black oxide. These are also available in custom sizes. These shaft collars are made to fit specific applications.
Single split shaft collars are available in a variety of sizes to fit a wide range of shaft diameters, from 1/8″ to 4 15/16″. The material used for the shaft should be softer than the material used for the set screw. They are marked with the bore size and are available in non-plated, chrome-plated, and black oxide coated materials.
Heavy-duty shaft collars are designed to hold a large amount of torque. They are available in two-piece clamp and one-piece clamp styles and offer up to 25 percent more holding force than standard collars. They are also available in a variety of materials, including proprietary black oxide finish, 1215 lead-free steel, 303 stainless steel, and high-strength 2024 aluminum.
Single split shaft collars are generally easy to install and remove. The design of these collars allows the shaft to fit into it evenly, which improves holding power. They also eliminate the need to remove or disassemble other components of the shaft. Additionally, they are easy to adjust and can work with virtually any shaft.
Single split shaft collars come in two-piece and one-piece styles. One-piece shaft collars are simpler to install and do not damage the shaft. Clamp-style collars are easy to use and do not require tools. They are designed to be hand-adjustable. These collars are recommended for light-duty applications. They are available in a wide range of threaded bore sizes. They also come in various styles, including ring-style and set-screw collars.
Set-screw shaft collars
Set-screw shaft collars are made of different materials, including steel, aluminum, and zinc plated steel. They are available in various widths and sizes. They can be used in aerospace, defense, and construction applications. Some types are standard, while others are custom-made.
A shaft collar has three primary functions: it holds a component in place, locates the component on a shaft, and creates an attachment between the shaft and another component. The design of a shaft collar depends on several factors, including the material, diameter, and geometry of the shaft.
One of the most common uses of shaft collars is to secure bearings and sprockets to shafts. In some cases, they also act as mechanical stops. For example, a two-piece clamp collar will wrap around the shaft without leaving any marks, while a set-screw collar will lock onto a shaft with a set screw. These types of collars can be used on predrilled and soft shafts.
Another advantage of set screw shaft collars is that they can be manufactured in a lightweight style for space-constrained applications. Another benefit is their ability to hold twice as much load as standard shaft collars. These collars are also available with a keyway, which makes them suitable for shafts with a key.
Another advantage of set-screw shaft collars is their safety. They were invented in the recessed socket screw industry and have become an industry standard. They prevent the shaft from sliding and causing a flanged bearing to come out. They are easy to install and remove, and they are ideal for light-duty applications.
Clamp style shaft collars are also available in one-piece and two-piece designs. This type of collar is unique in that it can be removed without damaging the shaft. They are also adjustable and can fit virtually any shaft. Their clamping force is evenly distributed around the shaft, so they are significantly safer than set screw collars, which use point-contact clamps.
Hinge shaft collars
The International series is a two-piece shaft collar with metric outer diameters, metric widths, and inch bores. These collars are suitable for many different types of applications, and are available in a variety of materials and bore sizes. They are available in 1215 lead-free steel with black oxide finish, high strength 2024 aluminum, and 303 stainless steel.
Custom Hinged Shaft Collars are a great choice for applications requiring quick and easy adjustment, especially in remote locations. They are available in a variety of materials, including steel, stainless steel, aluminum, and brass. You can even get custom-made collars for unusually shaped shafts.
Hinge shaft collars are similar to two-piece shaft collars in many ways. They allow easy disassembly and reassembly along the shaft and are usually the preferred choice in harsh environments. Hinge shaft collars have a simple design, allowing them to be installed quickly and easily. They also provide superior holding power. If you’re considering a hinge shaft collar for your application, it is important to consider how it will be used.
Hinge shaft collars serve as precise stops and spacers for different laboratory equipment. They can also be used on plastic, glass, and thin-walled tubes. They are often used in medical equipment, where the need for accuracy is paramount. They also serve as guides in optical measuring instruments. They are also useful in trucks and off-road vehicles, where they serve as mechanical stops.
Hinge shaft collars can be purchased in two-piece or one-piece designs. They can be adjusted using a single screw or lever. They can be installed and removed without causing any damage to the shaft. Unlike set screw collars, they don’t require tools. This makes them ideal for applications where access to the shaft is difficult or impossible. The advantages of these collars include improved safety and security.
editor by CX 2023-11-24