Product Description

CZPT Keyless Locking Units are utilised in rotating equipment,  generating clamping pressure among surface area of locking unit and shaft to create adjustable and releasable mechanical connection,  so as to clamp gears,  pulleys and other components to a shaft without having threads or keys. 

Raw components available in:
l   Metal C45E,
l   Steel 42CrMo4V
l   Stainless Steel AISI431,
l  Stainless Metal AISI304
 
Characteristics:
1. Link hubs solidly to shafts
two. Straightforward set up and disassembly
3. Substantial torque transmission
four. Long life time and straightforward upkeep
five. Minimal notching effect
6. Reduction of put on and tear of costly device components
 
Ubet Machinery provides sorts of Keyless Locking Gadgets,  which are interchangeable with numerous European and American makes. Large good quality usually arrives the 1st.

Ubet Keyless Locking System KLD-one Medium torque, not self-centering, Medium area pressures, No axial hub movement, adaptable use, machining tolerance shaft H8, hub H8 socket head locking screw DIN912-12.9. The most well-liked variety of all KLD Locking Device, Equipment Wheel Link the slotted style of the double tapered rings permits relatively higher mounting tolerance, The big taper angles are not self-locking and aid the launch of the connection.

KLD-1 Interchange with Z2,BIKON 4000,BEA BK40,BONFIX CCE2000,Challenge 01,Chiaravalli RCK40,CONEX  A, Fenlock FLK200,ITALBLOCK CN210,KTR100,KINLOK LOK30,KBS40,KANA 200,MAV 2005,POGGI CAL-A,RFN7012,Ringspann RLK200,Ringblok 1120,SIT 1,SATI KLGG,TOLLOK TLK200,Tsubaki AS,TAS3571,V-Blok VK400,Walther Flender MLC a thousand,Fenner Travel B-Loc B400,LoveJoy SLD1500,  FX10,OKBS40,DRIVELOCK40  

Ubet Keyless Locking Assembly KLD-two Medium torque, self-centering, small cross area, machining tolerance shaft H8, hub H8 Socket head locking screw DIN912-12.9
Self-centering with exceptional concentricity the small outer diameter is place-preserving and appropriate for tiny wheel diameters the spacer ring in between the outer flange and the hub maintains the fitting placement in the axial course to empower actual positioning without having a shaft collar the press-off threads in the outer flanges are utilised for dismantling.
 
KLD-2 Interchange with Z11,BIKON 8000,BEA BK80,BONFIX CCE1000,Problem 02,Chiaravalli RCK80,CONEX  B,7110 ECOLOC, Fenlock FLK110,GERWAH PSV2571.1,ITALBLOCK CN55,KTR250,KINLOK LOK10,KBS80,MAV 5061,POGGI CAL-B,RFN7110,Ringspann RLK110,Ringblok 1100,SIT 3,SATI KLCC,TOLLOK TLK110,Tsubaki TF,V-Blok VB800B,Walther Flender MLC3000,Fenner Push B-Loc B800,LoveJoy SLD1900, FX20,OKBS80,DRIVELOCK80

Ubet Locking Factors KLD-3
Reduced torque, Medium surface pressure, Taper rings only, Reduced axial and radial dimensions
This clamping set is self-centering with superb concentricity. The very little outer diameter is area-saving and suitable for tiny wheel diameters. The spacer ring between the outer flange and the hub maintains the fitting placement in the axial path to permit actual positioning without having a shaft collar. The push-off threads in the outer flanges are utilized for dismantling.
 
 KLD-3 Interchange with Z1,BIKON 5000,BEA BK50,BONFIX CCE3000,Challenge 03 Chiaravalli RCK50,CONEX  C,Fenlock FLK300,ITALBLOCK CN31,KRT150,KINLOK LOK80,KBS50,KANA 300,MAV 3003,POGGI CAL-C,RFN8006,Ringspann RLK300,Ringblok 1060,SIT 2,SATI KLNN,TOLLOK TLK300,Tsubaki EL, ,Walther Flender MLC 2000,Fenner Push B-Loc B112,LoveJoy SLD350, FX30,OKBS50,DRIVELOCK50
 
Ubet Mechanical Locking System KLD-four
High torque, self-centering, medium surface stress, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.nine
 
KLD-4 Interchange with Z3,BIKON 7000A,BEA BK70,BONFIX CCE4000,Challenge 04,Chiaravalli RCK70,CONEX  D,7004 ECOLOC, Fenlock FLK130,GERWAH PSV2007,ITALBLOCK CN54/N,KTR200,KINLOK LOK20A,KBS70,MAV 6901,POGGI CAL-D,RFN7013.,Ringspann RLK130,Ringblok 1300.1,SIT 5A,SATI KLDA,TOLLOK TLK130,V-Blok VK700, FX40,OKBS70,DRIVELOCK70
 
Ubet Shaft Hub Relationship KLD-five
Medium torque, reduced size, medium self-centering, High surface force, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.9
Suitable for narrow, disk-shaped wheel hubs. Self-centering and self-locking in the clamping point out.
 
KLD-5 Interchange with Z3B,BIKON 1003,BEA BK13,BONFIX CCE4100,Problem 05,Chiaravalli RCK13,CONEX  DS,7003 ECOLOC, Fenlock FLK132,GERWAH PSV2006,KTR203,KBS13,KANA 201,MAV 1062,POGGI CAL-DS,RFN7013., Ringspann RLK132,Ringblok 1710,SIT 6,SATI KLAA,TOLLOK TLK132,TAS3003,       V-Blok VK160,Walther Flender MLC 5006,LoveJoy SLD1750, FX41, OKBS13, DRIVELOCK13.
 
Ubet Shaft Locking Gadget KLD-six
Medium torque, self-centering, Minimal surface area force, No axial hub motion, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.9
 
 KLD-6 Interchange with Z13,BIKON 7000B,BEA BK71,BONFIX CCE4500,Obstacle 06,Chiaravalli RCK71,CONEX  E,7007 ECOLOC, Fenlock FLK131,GERWAH PSV2007.3,ITALBLOCK CN54/S,KTR201,KINLOK LOK20B,KBS71,MAV 6902,POGGI CAL-E,RFN7013.1,Ringspann RLK131,Ringblok 1300.2,SIT 5B,SATI KLDB,TOLLOK TLK131,Tsubaki KE,V-Blok VK700.1,Walther Flender MLC5000B, FX50,OKBS71,DRIVELOCK71
 
Ubet Clamping Power Lock KLD-7
Medium torque, lowered size, Substantial surface strain, No axial hub motion, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.9 Simultaneous Relationship of Chain Sprocket
 
 KLD-7 Interchange with Z8,BIKON 1006,BEA BK16,BONFIX CCE4600,Problem 07,Chiaravalli RCK16,CONEX  ES,7006 ECOLOC,Fenlock FLK133,GERWAH PSV2006.3,ITALBLOCK CN9/4,KTR206,KBS16,KANA 201,MAV 1061,POGGI CAL-ES,RFN7013.1,Ringspann RLK133,Ringblok 1720,SATI KLAB,TOLLOK TLK133,Tsubaki AE,TAS3006,V-Blok VK130,Walther Flender MLC 5007,LoveJoy SLD1750, FX51,OKBS16,DRIVELOCK16
 
Ubet Shrink Disc KLD-fourteen
Large torque, No axial hub movement, Higher pace application, favored solution for coupling hub and hollow shaft gearbox, DIN931-10.9 screw Intelligent-Lock Shrink Disc, Slim Hub Link for sprockets, join hollow and reliable shafts frictionally and backlash-free of charge.
 
KLD-14 Interchange with Z7B,BEA BK19,BONFIX CCE8000,Obstacle 14,Chiaravalli RCK19,CONEX  SD, Fenlock FLK603, ,KTR603,KBS19,MAV 2008,RFN4071,Ringspann RLK603,Ringblok 2200,SATI KLDD,TOLLOK TLK603, Tsubaki SL, ,Walther Flender MLC 9050,Fenner Generate B-Loc SD10,LoveJoy SLD900, FX190,OKBS19,DRIVELOCK19
 
Ubet Locking Assembly KLD-fifteen
High torque, self-centering, Minimal-medium surface strain, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.9
 
KLD-15 Interchange with BEA BK15, Problem 15,Chiaravalli RCK15,CONEX  EP, Fenlock FLK134,KBS15 ,MAV 3061,Ringspann RLK134,SATI KLBB,TOLLOK TLK134,  FX52,DRIVELOCK15
 
 
Ubet Locking Bushes KLD-16
Medium torque, Reduced size, Medium self-centering, Substantial area strain, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.9
 
 KLD-16 Interchange with BONFIX CCE4900,Problem 16,CONEX  L,KTR225,KBS52,SATI KLHH, FX120
 
 
Ubet Ball Bearing Adapter Sleeve KLD-17
Lower torque, Brief Length, Not self-centering, Minimal surface area pressure, machining tolerance shaft H8, hub H8 
 KLD-17 Interchange with BEA BK25, Obstacle seventeen, KBS51, SATI KLFC, FX80
 
Ubet Bearing Adapter Sleeve  KLD-17.1
Lower-medium torque, self-centering, low surface area strain, machining tolerance shaft H8, hub H8
 
KLD-seventeen.1 Interchange with Z19B, BEA BK26,Challenge 21,Chiaravalli RCK55, Fenlock FLK250,KTR125,KBS55, POGGI CAL-L,Ringspann RLK250,Ringblok 1500, SATI KLFF,TOLLOK TLK250
 
Ubet Shaft Clamping Collar KLD-eighteen
Low-medium torque, Limited Duration, self-centering, reduced area strain, machining tolerance shaft H8, hub H8, socket head Locking screw DIN912-12.9
This clamping set is self-centering and suitable for incredibly modest shaft diameters.     It transfers common to massive torques
 
KLD-eighteen   Interchange with BEA BK61,Chiaravalli RCK61,7002 ECOLOC ,GERWAH PSV2061,KTR105,KBS61,MAV 7903,SATI KLSS, Walther Flender MLC 5050, FX350,OKBS61,DRIVELOCK61
 
Ubet Clamping System KLD-19
really high torque, self-centering, medium area pressure, no axial hub motion, machining tolerance shaft H8, hub H8,  socket head Locking screw DIN912-twelve.9
This clamping established is self-centering with excellent concentricity. The incredibly little outer diameter is area-saving and suitable for small wheel diameters. The spacer ring amongst the outer flange and the hub maintains the fitting place in the axial direction to permit actual positioning without having a shaft collar.
 
KLD-19 Interchange with Z12A,BIKON 1012,BEA BK11,BONFIX CCE9500,Obstacle 19,Chiaravalli RCK11,CONEX  F,7005 ECOLOC,Fenlock FLK400,GERWAH PSV2005,ITALBLOCK CN911,KTR400,KINLOK LOK40,KBS11,MAV 4061,POGGI CAL-F,RFN7015,Ringspann RLK400,Ringblok 1800,SIT 4,SATI KLEE,TOLLOK TLK400,Tsubaki Ad,TAS3012,V-Blok VK112,Walther Flender MLC 4000/MLC 7000,Fenner Drive B-Loc B112,LoveJoy SLD2600, FX60,OKBS11,DRIVELOCK11
 
Locking System KLD-33 interchange with Z4, RFN7014

Locking Unit KLD-34 interchange with  Z5,BIKON 1015./1015.1, 7009 ECOLOC,Fenlock ,GERWAH PSV2009, KTR401,MAV 1008,RFN7015.,Ringspann RLK401,Ringblok 1810,TOLLOK TLK451,TAS3015./3015.1,
 
Keyless Locking Device also phone as under
1.     Welle-Nabe-Verbindungen
two.     Wellenspannsaetze,
3.     Spannsaetze, 
four.     Taper Spannbuchsen,
5.     Taper Lock, 
six.     Keyless Locking System,
seven.     Keyless Locking  Assembly,
eight.     Keyless Shaft Locking Gadget,
9.     Keyless Shaft Hub Locking System,
ten.  Keyless Bushings,
eleven.  Keyless Shaft Hub Relationship,
12.  Clamping Sleeve,
thirteen.  Clamping Element,
14.  Clamping Collar,
fifteen.  Clamping Bush,
sixteen.  Clamping Gadgets,
seventeen.  Clamping Set,
eighteen.  Clamping Electrical power Lock,
19.  Cone Clamping Factor,
twenty.  Shaft Clamping,
21.  Shaft Repairing,
22.  Shaft Repairing Cone Clamping Aspect, 
23.  Conical clamping rings, 
24.  Shaft Lock Clamping Factor,
25.  Shaft Clamping Aspect,
26.  Shaft Clamping Collar,
27.  Shaft Locking Gadget,
28.  Shaft Hub Relationship,
29.  Shaft Hub Locking Gadget,
thirty.  Shaft Hub Locking Assembly,
31.  Shaft Lock,
32.  Silted Clamping Element,
33.  Shaftlock Clamping Component,
34.  Locking Assembly,
35.  Locking Bushes,
36.  Locking Rings,
37.  Rigid Shaft Coupling,
38.  Rigid Shaft Coupler,
39.  Rigid Ring Block,
40.  Ring Shaft Lock, 
41.  Ringblock Locking Assemblies,
forty two.  Gear Wheel Connection,
forty three.  Zinc Plated Locking Units, 
forty four.  Nickel Plated Locking Assembly,
45.  Mechanical Locking System, 
forty six.  Mechanical shaft lock,
47.  Schrumpfscheibe,
forty eight.   External Locking Assembly,
forty nine.  Slender Hub Link for Sprockets,
50.  Shrink Disc, 
51.  Brake Disc, 
fifty two.  Shrink Disk,
fifty three.  External Locking Assembly Mild Responsibility, 
fifty four.  Shrink Discs Common Obligation, 
55.  Shrink Disks Hefty Duty, 
fifty six.  Intelligent-Lock Schrumpfscheibe, 
57.  Wise-Lock Shrink Disc, 
fifty eight.  Bearing Adapter Sleeve, 
fifty nine.  Lock Nut,
60.  Power NUT, 
61.  Energy Hyperlink, 
sixty two.  Shaft Self-Lock Ring Nut, 
sixty three.  Nickel Plated Locking Gadgets,  
sixty four.  Zinc Plated Locking products, 
65.  Stainless Metal Locking Gadgets.

###

###

###

###

Different Types of Shaft Collars and How to Choose the Right One For Your Needs

A shaft collar is a simple machine component, but its role is crucial in a variety of power transmission applications. It is most commonly found in gearboxes and motors. Its simple design makes it a relatively easy component to install. In addition to being useful for bearing faces, shaft collars are also used as mechanical stops.

Single split shaft collars

Single split shaft collars are a common design choice for industrial applications. They provide easy installation and disassembly, reducing downtime and labor. Unlike traditional collars, they use full seating torque of set screws, resulting in even distribution of forces along the shaft circumference. In addition, they provide stronger holding power.
Single split shaft collars are available in a variety of sizes and materials. They are typically made of stainless steel, alloyed steel, or nylon. They are available with a black oxide finish or a smooth finish. In addition, they can be manufactured to custom sizes. The benefits of shaft collars manufactured by Power Rite are the high quality of their materials and the close tolerances of their manufacturing process.
Single split shaft collars are available in D-bore or hex bore configurations. They are designed to fit shafts with diameters from 1/4″ to 6″. Some of these types also have a proprietary black oxide finish. Single split shaft collars can be manufactured with a range of materials, including 303 stainless steel and 1215 lead-free steel. They can also be made with engineered plastic.
Single split shaft collars are an excellent choice for applications where accurate positioning is essential. These collars can be easily installed and removed without removing any of the shaft components. They feature double grub screws to help tighten the clamp around the shaft. This feature makes installation and removal easier and reduces downtime.
Single split shaft collars are also available in a lightweight style for applications where space is an issue. While these collars are ideal for light-duty applications, they are not ideal for heavy-duty environments. Single split shaft collars are generally made of a softer material, such as steel. They have high torque capacities and hold securely around a shaft. However, their high holding power and low friction means they can damage a shaft or cause indentations that make repositioning the shaft difficult.
Clamp-style shaft collars are another option for tougher installations. This type offers more clamping power than a one-piece shaft collar. They come in either a one-piece or two-piece design, and can be installed by hand.

Set screw collars

Set screw collars are used to secure shafts. They are available in a variety of sizes and materials. Available options include hex socket, cup point, and 3A thread screws. They are suitable for a variety of industries, including food, wood, and chemical. A distributor of set screw collars can custom-design them to meet the specifications of a given application.
There are many different types of shaft collars, which include socket set screw collars, 2-hole set screw collars, and metric and stainless steel collars. In addition to these, you can also find corrosion-resistant set screw collars with a black oxide finish. These collars are ideal for industrial and commercial applications and are RoHS compliant.
Set screw collars are the most cost-effective option for shaft collars. They also offer lightweight options for applications where space is at a premium. Additionally, they can be equipped with a second screw positioned at 90 degrees to provide additional load capacity. They also come with a keyway to accommodate keyed shafts. These collars provide a reliable solution for securing shafts in a variety of applications.
Compared to set screw collars, clamp-style collars are easier to install and have greater holding power. They are available in one and two-piece versions. Clamp style collars are designed to lock onto a shaft while not damaging it. In addition, they are easily removed and reinstalled. They can be used in a variety of settings, including in guiding systems and bombsights.
Set screw shaft collars are an excellent choice for applications where precision is important. They prevent shafts from moving and hold power transmission components in place. The set screw collar is set in place with a grub screw or set screw. The screw driver can adjust the set screw to achieve the desired position.

Quick-clamp shaft collars

Quick-clamp shaft collars are a simple yet effective way to secure shafts. These collars have an eccentric lever that generates a locking force on the shaft. They are easy to install and remove and are manufactured with an aluminum design. In addition, these collars have a low mass inertia value. They are available in both one-piece and two-piece styles. Both styles have outer diameter flats for mounting other components.
The Quick-clamp shaft collars are resilient and feature a flush handle. They are easy to install and adjust, eliminating the need for tools and reducing production downtime. Another feature of these collars is that they have a high-strength tension adjustment screw that ensures compatibility with a wider range of shaft tolerances. These collars also have an axial holding power adjustment screw.
CZPT manufactures two types of quick-clamp shaft collars. One type has a cam lever that sits flush with the outside diameter and is finger-actuated. The other type is a clamp-style collar with a tension-adjustment screw. This design is better suited to low-rpm applications, or for frequent changeovers.

Choosing the right shaft collar for your application

Shaft collars play a key role in many industrial applications, and choosing the correct one is critical. They need to be designed properly and have the appropriate performance characteristics to ensure safe and effective operation. In this article, we will look at the different types of shaft collars and how to choose the right one for your needs. Typically, shaft collars are made from steel or aluminum, coated with zinc or another corrosion resistant material. But they can also be made from non-metallic materials.
Shaft collars come in a variety of shapes and materials, and the right one for your application will depend on these features. The key factors to consider are the material, holding power, and surface treatment, and their alignment with your application specifications. The shaft collars that fit your application best are often highly customizable, so it is important to determine the exact specifications for your application.
Shaft collars are simple and versatile components that are used to secure bearings on a shaft. They also serve as mechanical stops and can help to align and space other components. Shaft collars are widely used in gearbox assemblies, flagpoles, medical instruments, and other applications. They are available in a wide variety of styles, and can be used for nearly any application.
The type of shaft collar you choose will depend on the application and the type of machine. A heavier duty shaft collar will provide better vibration and shock resistance. These collars are typically designed for off-road or mining applications, and can be made of heavy-duty steel. They also provide more holding power, as double-wide shaft collars can provide an additional 25% of holding power.
When choosing a shaft collar, it’s important to consider the application and the required level of maintenance. Some assemblies will only need minor adjustments, while others require frequent disassembly. A two-piece shaft collar is a better option for assemblies that will have to be removed often.

editor by czh 2023-01-07