Solution Description

CZPT Keyless Locking Products are employed in rotating machinery,  making clamping pressure among surface of locking gadget and shaft to generate adjustable and releasable mechanical link,  so as to clamp gears,  pulleys and other elements to a shaft with no threads or keys.

Uncooked components obtainable in:
l   Metal C45E
l   Metal 42CrMo4V
l   Stainless Steel AISI431
l  Stainless Steel AISI304
 
Characteristics:
1. Link hubs solidly to shafts
2. Effortless set up and disassembly
three. Large torque transmission
four. Lengthy life span and effortless upkeep
five. Lower notching effect
6. Reduction of use and tear of high-priced machine components
 
Ubet Machinery provides types of Keyless Locking Devices,  which are interchangeable with many European and American manufacturers.  Substantial quality often will come the 1st.

 Ubet Keyless Locking Unit KLD-one Medium torque, not self-centering, Medium surface pressures, No axial hub movement, flexible use, machining tolerance shaft H8, hub H8 socket head locking screw DIN912-12.9. The most popular variety of all KLD Locking System, Equipment Wheel Relationship the slotted design of the double tapered rings permits comparatively high mounting tolerance, The huge taper angles are not self-locking and aid the launch of the link.

KLD-1 Interchange with Z2,BIKON 4000,BEA BK40,BONFIX CCE2000,Problem 01,Chiaravalli RCK40,CONEX  A, Fenlock FLK200,ITALBLOCK CN210,KTR100,KINLOK LOK30,KBS40,KANA two hundred,MAV 2005,POGGI CAL-A,RFN7012,Ringspann RLK200,Ringblok 1120,SIT 1,SATI KLGG,TOLLOK TLK200,Tsubaki AS,TAS3571,V-Blok VK400,Walther Flender MLC one thousand,Fenner Generate B-Loc B400,LoveJoy SLD1500, OKBS40,DRIVELOCK40  

Ubet Keyless Locking Assembly KLD-2 Medium torque, self-centering, little cross segment, machining tolerance shaft H8, hub H8 Socket head locking screw DIN912-twelve.9
Self-centering with superb concentricity the small outer diameter is place-conserving and suited for modest wheel diameters the spacer ring between the outer flange and the hub maintains the fitting placement in the axial direction to permit specific positioning with out a shaft collar the press-off threads in the outer flanges are employed for dismantling.
 
KLD-2 Interchange with Z11,BIKON 8000,BEA BK80,BONFIX CCE1000,Challenge 02,Chiaravalli RCK80,CONEX  B,7110 ECOLOC, Fenlock FLK110,GERWAH PSV2571.1,ITALBLOCK CN55,KTR250,KINLOK LOK10,KBS80,MAV 5061,POGGI CAL-B,RFN7110,Ringspann RLK110,Ringblok 1100,SIT 3,SATI KLCC,TOLLOK TLK110,Tsubaki TF,V-Blok VB800B,Walther Flender MLC3000,Fenner Travel B-Loc B800,LoveJoy SLD1900,OKBS80,DRIVELOCK80

Ubet Locking Elements KLD-3
Reduced torque, Medium surface pressure, Taper rings only, Reduced axial and radial dimensions
This clamping established is self-centering with excellent concentricity. The incredibly modest outer diameter is place-conserving and ideal for little wheel diameters. The spacer ring among the outer flange and the hub maintains the fitting position in the axial course to enable exact positioning without a shaft collar. The press-off threads in the outer flanges are utilised for dismantling.
 
 KLD-3 Interchange with Z1,BIKON 5000,BEA BK50,BONFIX CCE3000,Problem 03 Chiaravalli RCK50,CONEX  C,Fenlock FLK300,ITALBLOCK CN31,KRT150,KINLOK LOK80,KBS50,KANA 300,MAV 3003,POGGI CAL-C,RFN8006,Ringspann RLK300,Ringblok 1060,SIT 2,SATI KLNN,TOLLOK TLK300,Tsubaki EL, ,Walther Flender MLC 2000,Fenner Generate B-Loc B112,LoveJoy SLD350,OKBS50,DRIVELOCK50
 
Ubet Mechanical Locking Unit KLD-four
Substantial torque, self-centering, medium surface stress, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine
 
KLD-4 Interchange with Z3,BIKON 7000A,BEA BK70,BONFIX CCE4000,Obstacle 04,Chiaravalli RCK70,CONEX  D,7004 ECOLOC, Fenlock FLK130,GERWAH PSV2007,ITALBLOCK CN54/N,KTR200,KINLOK LOK20A,KBS70,MAV 6901,POGGI CAL-D,RFN7013.,Ringspann RLK130,Ringblok 1300.1,SIT 5A,SATI KLDA,TOLLOK TLK130,V-Blok VK700,OKBS70,DRIVELOCK70
 
Ubet Shaft Hub Link KLD-five
Medium torque, decreased duration, medium self-centering, High surface strain, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.9
Ideal for slender, disk-formed wheel hubs. Self-centering and self-locking in the clamping point out.
 
KLD-5 Interchange with Z3B,BIKON 1003,BEA BK13,BONFIX CCE4100,Problem 05,Chiaravalli RCK13,CONEX  DS,7003 ECOLOC, Fenlock FLK132,GERWAH PSV2006,KTR203,KBS13,KANA 201,MAV 1062,POGGI CAL-DS,RFN7013., Ringspann RLK132,Ringblok 1710,SIT 6,SATI KLAA,TOLLOK TLK132,TAS3003,       V-Blok VK160,Walther Flender MLC 5006,LoveJoy SLD1750,OKBS13, DRIVELOCK13.
 
Ubet Shaft Locking Device KLD-6
Medium torque, self-centering, Lower surface force, No axial hub movement, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine
 
 KLD-6 Interchange with Z13,BIKON 7000B,BEA BK71,BONFIX CCE4500,Problem 06,Chiaravalli RCK71,CONEX  E,7007 ECOLOC, Fenlock FLK131,GERWAH PSV2007.3,ITALBLOCK CN54/S,KTR201,KINLOK LOK20B,KBS71,MAV 6902,POGGI CAL-E,RFN7013.1,Ringspann RLK131,Ringblok 1300.2,SIT 5B,SATI KLDB,TOLLOK TLK131,Tsubaki KE,V-Blok VK700.1,Walther Flender MLC5000B,OKBS71,DRIVELOCK71
 
Ubet Clamping Electrical power Lock KLD-seven
Medium torque, diminished duration, Higher surface area pressure, No axial hub movement, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-12.9 Simultaneous Link of Chain Sprocket
 
 KLD-7 Interchange with Z8,BIKON 1006,BEA BK16,BONFIX CCE4600,Problem 07,Chiaravalli RCK16,CONEX  ES,7006 ECOLOC,Fenlock FLK133,GERWAH PSV2006.3,ITALBLOCK CN9/4,KTR206,KBS16,KANA 201,MAV 1061,POGGI CAL-ES,RFN7013.1,Ringspann RLK133,Ringblok 1720,SATI KLAB,TOLLOK TLK133,Tsubaki AE,TAS3006,V-Blok VK130,Walther Flender MLC 5007,LoveJoy SLD1750,OKBS16,DRIVELOCK16
 
Ubet Shrink Disc KLD-fourteen
Large torque, No axial hub motion, High velocity software, preferred remedy for coupling hub and hollow shaft gearbox, DIN931-ten.9 screw Intelligent-Lock Shrink Disc, Slender Hub Link for sprockets, link hollow and sound shafts frictionally and backlash-totally free.
 
KLD-14 Interchange with Z7B,BEA BK19,BONFIX CCE8000,Obstacle fourteen,Chiaravalli RCK19,CONEX  SD, Fenlock FLK603, ,KTR603,KBS19,MAV 2008,RFN4071,Ringspann RLK603,Ringblok 2200,SATI KLDD,TOLLOK TLK603, Tsubaki SL, ,Walther Flender MLC 9050,Fenner Travel B-Loc SD10,LoveJoy SLD900,OKBS19,DRIVELOCK19
 
Ubet Locking Assembly KLD-15
Higher torque, self-centering, Low-medium surface area stress, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.9
 
KLD-15 Interchange with BEA BK15, Challenge 15,Chiaravalli RCK15,CONEX  EP, Fenlock FLK134,KBS15 ,MAV 3061,Ringspann RLK134,SATI KLBB,TOLLOK TLK134,DRIVELOCK15
 
 
Ubet Locking Bushes KLD-sixteen
Medium torque, Decreased duration, Medium self-centering, Large area force, machining tolerance shaft H8, hub H8 socket head Locking screw DIN912-twelve.nine
 
 KLD-16 Interchange with BONFIX CCE4900,Problem 16,CONEX  L,KTR225,KBS52,SATI KLHH
 
 
Ubet Ball Bearing Adapter Sleeve KLD-17
Reduced torque, Limited Length, Not self-centering, Reduced area stress, machining tolerance shaft H8, hub H8 
 KLD-17 Interchange with BEA BK25, Problem seventeen, KBS51, SATI KLFC
 
Ubet Bearing Adapter Sleeve  KLD-17.one
Reduced-medium torque, self-centering, low area strain, machining tolerance shaft H8, hub H8
 
KLD-17.1 Interchange with Z19B, BEA BK26,Problem 21,Chiaravalli RCK55, Fenlock FLK250,KTR125,KBS55, POGGI CAL-L,Ringspann RLK250,Ringblok 1500, SATI KLFF,TOLLOK TLK250
 
Ubet Shaft Clamping Collar KLD-18
Minimal-medium torque, Limited Duration, self-centering, lower floor force, machining tolerance shaft H8, hub H8, socket head Locking screw DIN912-12.9
This clamping established is self-centering and suitable for very small shaft diameters.     It transfers regular to huge torques
 
KLD-18   Interchange with BEA BK61,Chiaravalli RCK61,7002 ECOLOC ,GERWAH PSV2061,KTR105,KBS61,MAV 7903,SATI KLSS, Walther Flender MLC 5050,OKBS61,DRIVELOCK61
 
Ubet Clamping System KLD-19
quite high torque, self-centering, medium floor stress, no axial hub motion, machining tolerance shaft H8, hub H8,  socket head Locking screw DIN912-twelve.nine
This clamping set is self-centering with outstanding concentricity. The incredibly modest outer diameter is space-conserving and ideal for modest wheel diameters. The spacer ring in between the outer flange and the hub maintains the fitting position in the axial path to enable exact positioning without having a shaft collar.
 
KLD-19 Interchange with Z12A,BIKON 1012,BEA BK11,BONFIX CCE9500,Obstacle 19,Chiaravalli RCK11,CONEX  F,7005 ECOLOC,Fenlock FLK400,GERWAH PSV2005,ITALBLOCK CN911,KTR400,KINLOK LOK40,KBS11,MAV 4061,POGGI CAL-F,RFN7015,Ringspann RLK400,Ringblok 1800,SIT 4,SATI KLEE,TOLLOK TLK400,Tsubaki Advertisement,TAS3012,V-Blok VK112,Walther Flender MLC 4000/MLC 7000,Fenner Travel B-Loc B112,LoveJoy SLD2600,OKBS11,DRIVELOCK11
 
Locking Unit KLD-33 interchange with Z4, RFN7014

Locking Device KLD-34 interchange with  Z5,BIKON 1015./1015.1, 7009 ECOLOC,Fenlock ,GERWAH PSV2009, KTR401,MAV 1008,RFN7015.,Ringspann RLK401,Ringblok 1810,TOLLOK TLK451,TAS3015./3015.1,
 
Keyless Locking System also call as underneath
1.     Welle-Nabe-Verbindungen
two.     Wellenspannsaetze,
three.     Spannsaetze, 
4.     Taper Spannbuchsen,
5.     Taper Lock, 
six.     Keyless Locking System,
7.     Keyless Locking  Assembly,
eight.     Keyless Shaft Locking Unit,
nine.     Keyless Shaft Hub Locking System,
ten.  Keyless Bushings,
eleven.  Keyless Shaft Hub Connection,
twelve.  Clamping Sleeve,
13.  Clamping Aspect,
14.  Clamping Collar,
15.  Clamping Bush,
sixteen.  Clamping Units,
17.  Clamping Set,
eighteen.  Clamping Electrical power Lock,
19.  Cone Clamping Element,
20.  Shaft Clamping,
21.  Shaft Repairing,
22.  Shaft Repairing Cone Clamping Factor, 
23.  Conical clamping rings, 
24.  Shaft Lock Clamping Element,
twenty five.  Shaft Clamping Element,
26.  Shaft Clamping Collar,
27.  Shaft Locking Gadget,
28.  Shaft Hub Connection,
29.  Shaft Hub Locking Device,
thirty.  Shaft Hub Locking Assembly,
31.  Shaft Lock,
32.  Silted Clamping Element,
33.  Shaftlock Clamping Component,
34.  Locking Assembly,
35.  Locking Bushes,
36.  Locking Rings,
37.  Rigid Shaft Coupling,
38.  Rigid Shaft Coupler,
39.  Rigid Ring Block,
forty.  Ring Shaft Lock, 
41.  Ringblock Locking Assemblies,
42.  Equipment Wheel Connection,
forty three.  Zinc Plated Locking Units, 
44.  Nickel Plated Locking Assembly,
forty five.  Mechanical Locking Unit, 
forty six.  Mechanical shaft lock,
forty seven.  Schrumpfscheibe,
48.   External Locking Assembly,
forty nine.  Slender Hub Relationship for Sprockets,
fifty.  Shrink Disc, 
fifty one.  Brake Disc, 
fifty two.  Shrink Disk,
53.  Exterior Locking Assembly Light Duty, 
54.  Shrink Discs Normal Responsibility, 
55.  Shrink Disks Hefty Obligation, 
56.  Intelligent-Lock Schrumpfscheibe, 
fifty seven.  Intelligent-Lock Shrink Disc, 
fifty eight.  Bearing Adapter Sleeve, 
fifty nine.  Lock Nut,
60.  Power NUT, 
61.  Power Hyperlink, 
sixty two.  Shaft Self-Lock Ring Nut, 
63.  Nickel Plated Locking Units,  
64.  Zinc Plated Locking products, 
sixty five.  Stainless Steel Locking Units.

###

###

###

###

Types of Shaft Collars

Clamp style shaft collars

A variety of styles of shaft collars are available for your machining needs. Clamp style shaft collars offer better flexibility and hold better than set screw collars. They are best for shaft materials that are softer than a setscrew. Clamp style collars are generally easier to maneuver, as they are two-piece and are hinged along the shaft.
Clamp style shaft collars come in two-piece and one-piece designs. One-piece clamp collars are typically used for a single-piece shaft, while two-piece clamp collars are used for multiple shafts. The one-piece clamp collar provides a more uniform holding force, while two-piece clamp collars provide more clamping force and can be installed anywhere on the shaft. Both styles are available in English and metric measurements.
The holding power of Clamp style shaft collars depends on their bore size and concentricity. The fastening hardware also affects torque transmission. Forged screws are generally stronger than broached screws, and are less likely to ream out. However, you still need to make sure that the material of the collar is strong enough to withstand the recommended screw torque.
Clamp style shaft collars are available in 1215 lead-free steel with a black oxide finish and zinc plating, as well as 303 and 316 stainless steel. They are also available in 2024 aluminum with an anodized finish. They are available in a range of sizes from 1/8” to six inches and 3mm to 150mm.
One of the main benefits of Clamp style shaft collars is their versatility. The collars can be used as guides, spacers, or stops on a variety of medical equipment. They are designed to distribute compression forces around a shaft, and they can be added at any stage in the manufacturing process.

Set screw shaft collars

Set screw shaft collars are used to secure screws to shafts. They can be purchased in a variety of sizes. The external diameter, internal diameter, and width of the collar will determine the proper collar size. Some companies also offer custom and adjustable-width collars. Clamp-style shaft collars are easier to maintain, and distribute torque evenly across the shaft. They also offer twice the holding power of set screw collars.
Collars are available in metric and inch sizes. They are also available in zinc plated and black-oxide steel. In addition, they come in a variety of styles. Whether you’re looking for a custom collar, or something a little more conventional, you can find it with the help of an ISO-certified supplier.
Set screw shaft collars come in different sizes and materials. Socket collars, for example, are made of steel and have an inside diameter of 5/64″ to 1-1/8″. In addition, forged socket set screw shaft collars come in 3/16 to 4 in. They are also available with special hardware for connection to shafts.
Set screw shaft collars are commonly used on transmission and machinery. A set screw allows you to secure the collar in position by setting it into the correct position with a grub screw or a set screw. The set screw can then be adjusted with a screw driver and is a quick and easy solution for keeping a shaft in place.

Aluminum shaft collars

Aluminum shaft collars offer a number of advantages, ranging from their light weight to their corrosion resistance. Aluminum shaft collars are available in various styles and sizes, and can be plated with a variety of finishes. They are also available in lightweight styles for applications with tight space constraints. The most important factor when selecting a shaft collar is the material used to make it. Aluminum is lighter than steel and has a high strength to weight ratio. The choice of material should also depend on how much corrosion resistance is required. For example, if the shaft will be exposed to extreme environments, it is a better choice to use treated steel.
Another benefit to aluminum shaft collars is their ability to be custom-matched to the shaft. This feature helps to increase their aesthetics and branding potential. In addition, the ability to color-code components and switches can improve safety. This is especially useful in fail-safe applications. By incorporating color-coded collars, manufacturers can increase the safety of their products.
Another advantage of aluminum shaft collars is their strength. For instance, they can withstand higher torque levels than other types of shaft collars. They can be easily adjusted, and their two-piece design makes them easy to replace. Moreover, CZPT keeps the two-piece collars together during manufacturing, ensuring a perfect fit for the shaft. These collars also feature forged steel socket screws for enhanced holding power and torque capacity.
Single-piece shaft collars are also available in various styles. The set screw type has a perpendicular outer face. The set screw in these collars is used to engage the mating shaft. This type of shaft collar is a good choice for rotating assemblies.

Stainless steel shaft collars

The main function of a stainless steel shaft collar is to provide clamping force to a rotating shaft. This is achieved by a variety of methods. One of these is by bending or hammering. A shaft collar can also be made of aluminum or a combination of both. These options provide different advantages, which are described in this article.
Stainless steel shaft collars are available in different sizes, shapes, and materials. The diameter of the shaft collar may range from five-sixteenths to two-and-a-half inches. Some manufacturers produce the collars in different materials, including T304, T316, 416, and 17-4PH. Their products may also come in various shapes, such as angles, flats, structural shapes, and threaded rods.
One of the most important advantages of a stainless steel shaft collar is its strength and durability. A well-made collar can prevent wear and tear and provide excellent holding power. It also has many applications and is useful in many industries. Its application ranges from vertical conveyors to horizontal athletic equipment machinery, from agriculture to retail.
While there are numerous types of shaft collars, all three types have some common characteristics. Typically, steel shaft collars have high holding power and slim to average profiles. Heavy-duty collars have twice the holding power of low-profile collars and are used in heavy-duty construction and mining. Ultra Heavy-Duty shaft collars have the highest axial holding power and are made of steel. Shaft collars may be treated with zinc for corrosion resistance.
One manufacturer offers stainless steel shaft collars made of 303 stainless steel and other materials. It offers collars of various diameters from three-eighth to one-eighth inch. They are available in threaded, mounting, and heavy-duty styles, and are suitable for a wide range of applications, including the aerospace, energy, and medical industries.

editor by czh 2023-01-22